Fretting fatigue life prediction of 316L stainless steel based on elastic-plastic fracture mechanics approach

被引：15
|
作者：
Noraphaiphipaksa, N. [1 ]
Manonukul, A. [2 ]
Kanchanomai, C. [1 ]
Mutoh, Y. [3 ]
机构：
[1] Thammasat Univ, Fac Engn, Dept Mech Engn, Pathum Thani 12120, Thailand
[2] Natl Met & Mat Technol Ctr MTEC, Klongluang 12120, Pathumthani, Thailand
[3] Nagaoka Univ Technol, Dept Syst Safety, Nagaoka, Niigata 9402188, Japan
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 78卷
关键词：
Fretting fatigue; Fracture mechanics; Fatigue life; Large scale yielding;
D O I：
10.1016/j.triboint.2014.04.029
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The fretting fatigue test of SUS316L stainless steel was carried out to investigate the influence of large scale yielding on fretting fatigue life. The location of the maximum shear stress range coincided with that of crack nucleation. The crack path could be estimated based on the maximum tangential stress range criterion. The larger plastic zone exceeding the small scale yielding condition was observed at a crack tip. The predicted fatigue lives based on the elastic-plastic fracture mechanics approach were in good agreement with the experimental lives, while those based on the linear-elastic fracture mechanics approach were longer than the experimental lives. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：84 / 93
页数：10
相关论文
共 50 条
  • [1] Liquid-metal embrittlement of Type 316L stainless steel by gallium as measured by elastic-plastic fracture mechanics
    Kolman, DG
    Chavarria, R
    [J]. CORROSION, 2004, 60 (03) : 254 - 261
  • [2] A damage mechanics approach to fretting fatigue life prediction with consideration of elastic-plastic damage model and wear
    Shen, Fei
    Hu, Weiping
    Meng, Qingchun
    [J]. TRIBOLOGY INTERNATIONAL, 2015, 82 : 176 - 190
  • [3] Gradient Elastic-Plastic Properties of Expanded Austenite Layer in 316L Stainless Steel
    Jiang, Yong
    Li, Yang
    Jia, Yun-Fei
    Zhang, Xian-Cheng
    Gong, Jian-Ming
    [J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2018, 31 (08) : 831 - 841
  • [4] An engineering approach to fatigue analysis based on elastic-plastic fracture mechanics
    Eufinger, J.
    Heinrietz, A.
    Bruder, T.
    Hanselka, H.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2013, 36 (01) : 65 - 74
  • [5] Thermomechanical fatigue evaluation and life prediction of 316L(N) stainless steel
    Nagesha, A.
    Valsan, M.
    Kannan, R.
    Rao, K. Bhanu Sankara
    Bauer, V.
    Christ, H. -J.
    Singh, Vakil
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (04) : 636 - 643
  • [6] Fatigue life calculation of notched components based on the elastic-plastic fatigue fracture mechanics
    Brüning, J
    Dankert, M
    Greuling, S
    Richter, C
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2001, 32 (04) : 337 - 341
  • [7] Effect of contact pressure on fretting fatigue in type 316L stainless steel
    Nakazawa, K
    Maruyama, N
    Hanawa, T
    [J]. FRETTING FATIGUE: ADVANCES IN BASIC UNDERSTANDING AND APPLICATIONS, 2003, 1425 : 169 - 182
  • [8] Mechanistic approach to the life prediction of 316L stainless steel under combined creep/fatigue cycling
    Rodriguez-Ibabe, Jose M.
    Martin-Meizoso, Antonio
    Martinez-Esnaola, Jose Manuel
    Fuentes, Manuel
    [J]. Materials Science and Engineering A, 1995, A194 (01): : 25 - 33
  • [9] Fretting fatigue behavior of 316L stainless steel under combined loading conditions
    Farrahi, G. H.
    Minaii, K.
    Bahai, H.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2019, 128
  • [10] An experimental study on bending fretting fatigue characteristics of 316L austenitic stainless steel
    Peng, J. F.
    Song, C.
    Shen, M. X.
    Zheng, J. F.
    Zhou, Z. R.
    Zhu, M. H.
    [J]. TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1417 - 1426
12345