Durability studies on steelmaking slag concretes

被引:80
|
作者
Arribas, I. [1 ]
Vegas, I. [1 ]
San-Jose, J. T. [2 ]
Manso, Juan M. [3 ]
机构
[1] TECNALIA C Geldo, Derio 48160, Spain
[2] Univ Basque Country, Dep Min Met & Mat Sci, Bilbao 48013, Spain
[3] EPS Univ Burgos, Dept Civil Engn, Burgos 09001, Spain
关键词
Aggregate-alkaline; Corrosion; Freeze/thaw; Marine environment; Steel slag; Sulfate resistance; STEEL SLAG; FROST-RESISTANCE; FURNACE SLAG; MECHANICAL-PROPERTIES; PORTLAND-CEMENT; SILICA FUME; EAF SLAG; FLY-ASH; MORTARS; WASTE;
D O I
10.1016/j.matdes.2014.06.002
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Electric-arc furnace slag is proposed as a substitute for the conventional aggregate used in classical structural concrete. In the present research is studied the durability of these slag aggregate concretes and their resistance to both physical (freeze-thaw, high temperature and relative humidity) and chemical degradation (sulfate attack, alkali-aggregate reaction and marine environment), as well as their resistance to the corrosion of steel reinforcement bars (an assessment of the risks of corrosion) embedded in the concrete matrix. This approach requires laboratory studies. The main objective of this work focuses on evaluating the durability of slag concrete under the conditions specified in the Spanish structural concrete code. In general terms, the behavior of the concrete with slag aggregate was similar to or better than the reference concrete (natural aggregate), except in case of exposure to marine environments and seawater, which resulted in quicker chloride penetration. The study confirms the viability of producing steel-reinforced concrete with slag aggregate. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:168 / 176
页数:9
相关论文
共 50 条
  • [1] Durability behavior of steelmaking slag masonry mortars
    Santamaria-Vicario, I.
    Rodriguez, A.
    Junco, C.
    Gutierrez-Gonzalez, S.
    Calderon, V.
    [J]. MATERIALS & DESIGN, 2016, 97 : 307 - 315
  • [2] Durability studies on ferrochrome slag as coarse aggregate in sustainable alkali activated slag/fly ash based concretes
    Yaragal, Subhash C.
    Kumar, B. Chethan
    Jitin, C.
    [J]. SUSTAINABLE MATERIALS AND TECHNOLOGIES, 2020, 23
  • [3] THE DURABILITY OF CONCRETES MADE WITH GASIFIER-SLAG CEMENT
    OSBORNE, GJ
    [J]. DURABILITY OF BUILDING MATERIALS, 1986, 4 (02): : 151 - 177
  • [4] Strength and Durability of Concrete Made with Electric Steelmaking Slag
    Polanco, Juan A.
    Manso, Juan M.
    Setien, Jesus
    Gonzalez, Javier J.
    [J]. ACI MATERIALS JOURNAL, 2011, 108 (02) : 196 - 203
  • [5] Durability of mortar and concretes containing slag with low hydraulic activity
    Hadjsadok, Ahmed
    Kenai, Said
    Courard, Luc
    Michel, Frederic
    Michelc, Jamal
    [J]. CEMENT & CONCRETE COMPOSITES, 2012, 34 (05): : 671 - 677
  • [6] Production of steelmaking slag blocks by carbon dioxide and their durability in the sea
    Takahashi, T
    Fukuhara, M
    [J]. EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 879 - 882
  • [7] Portland slag and composites cement concretes: engineering and durability properties
    Bostanci, Sevket Can
    Limbachiya, Mukesh
    Kew, Hsein
    [J]. JOURNAL OF CLEANER PRODUCTION, 2016, 112 : 542 - 552
  • [8] Curing of slag concretes at low temperatures: effect on selected durability properties
    Mike Otieno
    Riccardo Opeka
    [J]. MRS Advances, 2020, 5 : 1267 - 1275
  • [9] Alkali-activated slag concretes. Mechanical and durability behaviour
    Torres-Carrasco, Manuel
    del Mar Alonso, Maria
    Guarner, Paz
    Zamora, Ana
    Puertas, Francisca
    [J]. HORMIGON Y ACERO, 2018, 69 (285): : 163 - 168
  • [10] Curing of slag concretes at low temperatures: effect on selected durability properties
    Otieno, Mike
    Opeka, Riccardo
    [J]. MRS ADVANCES, 2020, 5 (25) : 1267 - 1275