Influence of surface treatment and crosslinking density on the rheological and mechanical properties of particle filled

被引:1
|
作者
Shohara, K [1 ]
Uotani, K [1 ]
Yamane, H [1 ]
机构
[1] Kyoto Inst Technol, Dept Adv Fibro Sci, Sakyo Ku, Kyoto 6068585, Japan
关键词
silicone resin; dynamic viscoelasticity; tensile property; surface treatment; crosslinking density;
D O I
10.1678/rheology.32.79
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Influence of surface treatment and crosslinking density on the rheological and mechanical properties of silicone resin filled with silica particles was investigated. Although addition of particle in the liquid silicone matrix increased the storage modulus G' and the complex viscosity \eta*\ especially at a low frequency region, surface treatment of particle suppressed such tendency. On the other hand, surface treatment increased the storage modulus E' and the tensile modulus E of crosslinked elastomers. Particle unfilled silicone elastomer showed an increasing storage modulus with temperature at a rubbery region behaving as an entropy elastomer and highly particle filled elastomers showed a decreasing storage modulus indicating an enthalpy elastic character. However silicone elastomers with small particle content changed their character from entropy elastic to enthalpy elastic with increasing crosslinking density.
引用
收藏
页码:79 / 84
页数:6
相关论文
共 50 条
  • [1] Rheological and mechanical properties of particle filled elastomers
    Shohara, K
    Uotani, K
    Yamane, H
    NIHON REOROJI GAKKAISHI, 2003, 31 (05) : 329 - 335
  • [2] Influence of the particle size and the filling degree of barium titanate filled silicone elastomers used as potential dielectric elastomers on the mechanical properties and the crosslinking density
    Ziegmann, Andreas
    Schubert, Dirk W.
    MATERIALS TODAY COMMUNICATIONS, 2018, 14 : 90 - 98
  • [3] Influence of crystallinity on rheological properties of unfilled and particle-filled polycarbonates
    Muenstedt, Helmut
    POLYMER, 2011, 52 (17) : 3677 - 3680
  • [4] Friction and Mechanical Properties of Highly Filled Polybenzoxazine Composites: Nanosilica Particle Size and Surface Treatment
    Mora, Phattarin
    Jubsilp, Chanchira
    Liawthanyarat, Nutthaphon
    Okhawilai, Manunya
    Rimdusit, Sarawut
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2019, 220 (01)
  • [5] RHEOLOGICAL PROPERTIES OF CALCIUM-CARBONATE FILLED POLYMER MELTS - INFLUENCE OF PARTICLE-SIZE AND SURFACE-TREATMENT IN SHEAR AND ELONGATIONAL FLOW EXPERIMENTS
    SUETSUGU, Y
    WHITE, JL
    JOURNAL OF RHEOLOGY, 1982, 26 (06) : 581 - 582
  • [6] Zirconia based feedstocks: Influence of particle surface modification on the rheological properties
    Auscher, M. C.
    Fulchiron, R.
    Fougerouse, N.
    Perie, T.
    Cassagnau, P.
    CERAMICS INTERNATIONAL, 2017, 43 (18) : 16950 - 16956
  • [7] The Influence of Particle Size and Surface Treatment of Filler on the Properties of Oyster Shell Powder Filled Polypropylene Composites
    Shah, Atta Ur Rehman
    Prabhakar, M. N.
    Wang, Huifeng
    Song, Jung-Il
    POLYMER COMPOSITES, 2018, 39 (07) : 2420 - 2430
  • [8] Effect of interface on rheological and the mechanical properties of filled polypropylene
    Liang, Ruifeng
    Xu, Yuanze
    Cai, Weizhen
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 1993, 10 (04): : 77 - 84
  • [9] The effect of crosslinking on mechanical properties of LDPE filled with organic fillers
    Chodak, I
    Nogellova, Z
    Kokta, BV
    MACROMOLECULAR SYMPOSIA, 1998, 129 : 151 - 161
  • [10] Influence of soapstone waste on the mechanical and rheological properties of high-density polyethylene
    de Sousa, Giulia Simao
    Santos da Silva, Geovane de Almeida
    Moraes d'Almeida, Jose Roberto
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (38)