Process Parameters Optimization of Friction Stir Welding of 6005A-T6 Aluminum Alloy Using Taguchi Technique

被引：17
|
作者：
Ma, Zhongwei [1 ]
Li, Qinghua [1 ]
Ma, Lin [1 ]
Hu, Wei [1 ]
Xu, Bo [2 ]
机构：
[1] Shenyang Aerosp Univ, 37 Daoyi South Ave, Shenyang 110136, Liaoning, Peoples R China
[2] Bombardier Sifang Qingdao Transportat Ltd, 86 Jinhong Dong RD, Qingdao 266111, Shandong, Peoples R China
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 07期
基金：
中国国家自然科学基金;
关键词：
Friction stir welding; Taguchi method; 6005A-T6 aluminum alloy; Microstructure; Mechanical properties; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; FATIGUE BEHAVIOR; ROTATION SPEED; MICROSTRUCTURE; PROPERTY; SHOULDER; DEFECT;
D O I：
10.1007/s12666-019-01639-7
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The control factors including rotating speed, welding speed and plunge depth of 6005A-T6 aluminum alloy friction stir welding were optimized by Taguchi method, and the combined effects of these factors were comprehensively investigated. Statistical results were analyzed by the analysis of variances and signal-to-noise ratios. The results show that the rotating speed is the most dominant factor in determining the joint tensile strength; and the plunge depth and welding speed are the second and third effective parameters, respectively. Under the optimum process parameters, the joint maximum tensile strength reaches 239.6 MPa which is 84% of that of the base material. The relationships between the main control factors, thermal cycle, formation, microstructure, mechanical properties and fracture characteristics were investigated.
引用
收藏
页码：1721 / 1731
页数：11
相关论文
共 50 条
  • [1] Process Parameters Optimization of Friction Stir Welding of 6005A-T6 Aluminum Alloy Using Taguchi Technique
    Zhongwei Ma
    Qinghua Li
    Lin Ma
    Wei Hu
    Bo Xu
    [J]. Transactions of the Indian Institute of Metals, 2019, 72 : 1721 - 1731
  • [2] Effects of welding speed on the microstructure and hardness in friction stir welding joints of 6005A-T6 aluminum alloy
    Dong, Peng
    Li, Hongmei
    Sun, Daqian
    Gong, Wenbiao
    Liu, Jie
    [J]. MATERIALS & DESIGN, 2013, 45 : 524 - 531
  • [3] Study on the fatigue performance of bobbin tool friction stir welding of 6005A-T6 aluminum alloy
    Zhang, Xinmeng
    Gao, Shikang
    Li, Gaohui
    Zhang, Haifeng
    Zhou, Li
    Wang, Ping
    [J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2023, 44 (09): : 30 - 36
  • [4] Optimization of parameters for micro friction stir welding of aluminum 5052 using Taguchi technique
    Sagheer-Abbasi, Yasir
    Ikramullah-Butt, Shahid
    Hussain, Ghulam
    Imran, Syed Husain
    Mohammad-Khan, Atif
    Baseer, Raja Abdul
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (1-4): : 369 - 378
  • [5] Optimization of parameters for micro friction stir welding of aluminum 5052 using Taguchi technique
    Yasir Sagheer-Abbasi
    Shahid Ikramullah-Butt
    Ghulam Hussain
    Syed Husain Imran
    Atif Mohammad-Khan
    Raja Abdul Baseer
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102 : 369 - 378
  • [6] Optimization of Process Parameters for Friction Stir Welding of Aluminum and Copper Using the Taguchi Method
    Eslami, Nima
    Hischer, Yannik
    Harms, Alexander
    Lauterbach, Dennis
    Boehm, Stefan
    [J]. METALS, 2019, 9 (01)
  • [7] Effect of welding speed on mechanical properties of bobbin tool friction stir welded 6005A-T6 aluminum alloy joints
    Ji, Hua
    Deng, Yunlai
    Deng, Jianfeng
    Xu, Hongyong
    Lin, Sen
    [J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (05): : 24 - 29
  • [8] Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
    Lakshminarayanan, A. K.
    Balasubramanian, V.
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2008, 18 (03) : 548 - 554
  • [9] Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique
    A.K.LAKSHMINARAYANAN
    V.BALASUBRAMANIAN
    [J]. Transactions of Nonferrous Metals Society of China, 2008, (03) : 548 - 554
  • [10] A Novel Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy 6061-T6
    Gomathisankar, M.
    Gangatharan, M.
    Pitchipoo, P.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (06) : 14397 - 14404
12345