Turning of Cast Inconel 718 with Coated Carbide and Whisker Reinforced Ceramic Tools

被引：3
|
作者：
He Linjiang [1 ]
Xu Jiuhua [1 ]
Su Honghua [1 ]
Chen Yan [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
来源：
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XV | 2014年 / 770卷
关键词：
turning; nickel-based alloys; tool wear; tool life; NICKEL-BASED ALLOYS; SUPERALLOYS; SPEED; WEAR;
D O I：
10.4028/www.scientific.net/MSF.770.136
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Nickel-based alloy is known as one of the most difficult-to-machine materials. During the machining process, the high temperature coupled with high strength and work hardening leads to excessive tool wear, short tool life, low productivity, etc. Tool life and material removal rate are the two targets of rough machining. In this paper, some turning tests are conducted to investigate the tool lives and material removal rate of coated carbide tools and whisker reinforced ceramic tools. The results show that notch wear is the dominant failure mode for whisker reinforced ceramic tools while severe flank wear and micro-chipping for coated carbide tools. The whisker reinforced ceramic tools are more effective in machining nickel-based alloys than the coated carbide tools both in tool life and material removal rate.
引用
收藏
页码：136 / 140
页数：5
相关论文
共 50 条
  • [1] An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
    Zhou, J. M.
    Bushlya, V.
    Stahl, J. E.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (02) : 372 - 384
  • [2] High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools
    Arunachalam, RM
    Mannan, MA
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXX, 2002, 2002, : 345 - 352
  • [3] High Speed Turning of Inconel 718 Using Ceramic and Carbide Cutting Tools
    S. Amini
    M. H. Fatemi
    R. Atefi
    [J]. Arabian Journal for Science and Engineering, 2014, 39 : 2323 - 2330
  • [4] High Speed Turning of Inconel 718 Using Ceramic and Carbide Cutting Tools
    Amini, S.
    Fatemi, M. H.
    Atefi, R.
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2014, 39 (03) : 2323 - 2330
  • [5] Statistical Analysis of Cutting Forces in Turning Inconel 718 with Coated Carbide Tools
    Zhu, Xiaoli
    Zhang, Song
    Ding, Tongcao
    Wang, Yuanwei
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 96 - 101
  • [6] Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants
    Sivalingam, Vinothkumar
    Zan, Zhuoliang
    Sun, Jie
    Selvam, Baskaran
    Gupta, Munish Kumar
    Jamil, Muhammad
    Mia, Mozammel
    [J]. TRIBOLOGY INTERNATIONAL, 2020, 148
  • [7] Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process
    Reddy, M. M.
    Joshua, C. X. H.
    [J]. 10TH CURTIN UNIVERSITY TECHNOLOGY SCIENCE AND ENGINEERING INTERNATIONAL CONFERENCE (CUTSE2015), 2016, 121
  • [8] Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining
    Ibrahim, Gusri Akhyar
    Haron, Che Hassan Che
    Ghani, Jaharah Abdul
    Said, Ahmad Yasir Moh
    Abu Yazid, Moh Zaid
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2011,
  • [9] Experimental study on cutting force of face-turning Inconel718 with ceramic tools and carbide tools
    Yao, Changfeng
    Zhou, Zheng
    Zhang, Jiyin
    Wu, Daoxia
    Tan, Liang
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (07) : 1 - 9
  • [10] Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL
    Marques, Armando
    Suarez, Mauro Paipa
    Sales, Wisley Falco
    Machado, Alisson Rocha
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 530 - 543
12345