Comparing intergranular corrosion in Al-Mg-Si-Cu alloys with and without α-Al(Fe,Mn,Cu)Si particles

被引:9
|
作者
Lervik, Adrian [1 ]
Danbolt, Turid [2 ]
Furu, Trond [2 ,3 ]
Holmestad, Randi [1 ]
Lunder, Otto [2 ,4 ]
机构
[1] Norwegian Univ Sci & Technol NTNU, Dept Phys, N-7491 Trondheim, Norway
[2] Norwegian Univ Sci & Technol NTNU, Dept Mat Sci & Engn, Trondheim, Norway
[3] Norsk Hydro ASA, Oslo, Norway
[4] SINTEF Ind, Trondheim, Norway
来源
关键词
aluminium alloys; electron microscopy; grain boundaries; intergranular corrosion; microstructure; INTERMETALLIC PHASES; ALUMINUM-ALLOYS; COPPER CONTENT; AGING CONDITIONS; HEAT-TREATMENT; IN-SITU; PRECIPITATION; BEHAVIOR; MODEL; MICROSTRUCTURE;
D O I
10.1002/maco.202011954
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, a model alloy without Fe and Mn additions, is compared with a commercial AA6005 alloy to further understand how the alpha-Al(Fe,Mn,Cu)Si particles affect intergranular corrosion (IGC) behaviour. Both alloys were subjected to an accelerated IGC test for durations ranging from 1 to 120 h. Microstructures were studied using scanning and transmission electron microscopy, and electron backscatter diffraction. The presence of alpha-Al(Fe,Mn,Cu)Si particles yields significantly more uniform IGC attacks and higher corrosion rates. However, the maximum depth of IGC attacks reaches similar values after similar to 24 h of exposure. This is attributed to the formation of Cu-rich particles along the grain boundaries during the corrosion process, which further catalyses the cathodic reactions.
引用
收藏
页码:575 / 584
页数:10
相关论文
共 50 条
  • [1] Evaluating the intergranular corrosion susceptibility of Al-Mg-Si-Cu alloys using electrochemical methods
    Schnatterer, C.
    Bulinger, A.
    Zander, D.
    [J]. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2016, 67 (12): : 1308 - 1313
  • [2] The intergranular corrosion susceptibility of a heavily overaged Al-Mg-Si-Cu alloy
    Li, Hai
    Zhao, Peipei
    Wang, Zhixiu
    Mao, Qingzhong
    Fang, Bijun
    Song, Renguo
    Zheng, Zigiao
    [J]. CORROSION SCIENCE, 2016, 107 : 113 - 122
  • [3] Effect of residual constituents on intergranular corrosion behavior of Al-Mg-Si-Cu alloy
    [J]. Li, H. (lehigh_73@163.com), 1600, Central South University of Technology (22):
  • [4] Effect of surface grinding on the microstructure and corrosion of Al-Mg-Si-Cu alloys
    Kang, Minglong
    Zhou, Li
    Deng, Yunlai
    Lei, Jinqin
    Guo, Xiaobin
    Jiang, Yong
    [J]. MATERIALS RESEARCH EXPRESS, 2023, 10 (11)
  • [5] The influence of Cu content and Mg/Si ratio on the strength and formability in Al-Mg-Si-Cu alloys
    Zang, Ruojin
    Ding, Lipeng
    Ehlers, Flemming J. H.
    Jia, Zhihong
    Xu, Shaoqiang
    Li, Yanjun
    Cao, Lingfei
    [J]. MATERIALS CHARACTERIZATION, 2023, 205
  • [6] Grain boundary structures and their correlation with intergranular corrosion in an extruded Al-Mg-Si-Cu alloy
    Lervik, A.
    Wenner, S.
    Lunder, O.
    Marioara, C. D.
    Holmestad, R.
    [J]. MATERIALS CHARACTERIZATION, 2020, 170
  • [7] Improving the intergranular corrosion resistance of Al-Mg-Si-Cu alloys without strength loss by a two-step aging treatment
    Wang, Zhixiu
    Li, Hai
    Miao, Fenfen
    Sun, Wangjie
    Fang, Bijun
    Song, Renguo
    Zheng, Ziqiao
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 267 - 273
  • [8] Effect of Cu content on microstructures and properties of Al-Mg-Si-Cu alloys
    Wang, Zhi-Xiu
    Li, Hai
    Gu, Jian-Hua
    Song, Ren-Guo
    Zheng, Zi-Qiao
    [J]. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2012, 22 (12): : 3348 - 3355
  • [9] Cu distribution in intermetallic phases in extruded Al-Mg-Si-Cu alloys
    Kawahara, Yasuhito
    Thrane, Elisabeth Savitri
    Mørtsell, Eva Anne
    Røyset, Jostein
    Holmestad, Randi
    Kaneko, Kenji
    [J]. Journal of Alloys and Compounds, 2025, 1012
  • [10] Investigation of the interface precipitation on α-Al(Fe,Mn)Si particles in Al-Fe-Mn-Si-Mg-Cu alloy
    Yuan, Zhipeng
    Lu, Yifan
    Yang, Zhikang
    Tu, Yiyou
    Yuan, Ting
    Huang, Liang
    Ni, Zenglei
    Wang, Xingxing
    Liu, Zili
    He, Peng
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 28 : 4531 - 4539