Four-point bending fatigue behaviour of an iron-based laser sintered material

被引：14
|
作者：
Wang, Y. [1 ]
Bergstrom, J. [1 ]
Burman, C. [1 ]
机构：
[1] Karlstad Univ, Dept Mat Engn, SE-65188 Karlstad, Sweden
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2006年 / 28卷 / 12期
关键词：
laser sintered metal; four-point bending fatigue; crack initiation and propagation;
D O I：
10.1016/j.ijfatigue.2006.01.007
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
New material processing methods such as laser sintering of metal powder necessitates new knowledge and characterization of the material to support its implementation in technical applications. Fatigue behaviour of a laser sintered FeNiCu-alloy was studied with emphasis on crack path, initiation and propagation. Fatigue crack growth was investigated by surface replication in four-point bending fatigue tests. The fatigue behaviour was controlled by the complex layered structure. Pores on or under the surface were preferable places for crack initiation. Crack linkage and deflection occurred due to crack tip interaction with microstructure and sinter layers where micro-cracks initiated at pores adjacent to the advancing crack tip. Crack growth rate and stress intensity factor were calculated from surface replicas and showed an oscillating behaviour. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1705 / 1715
页数：11
相关论文
共 50 条
  • [1] Fatigue behaviour of laser-sintered PA12 specimens under four-point rotating bending
    Munguia, Javier
    Dalgarno, Kenny
    RAPID PROTOTYPING JOURNAL, 2014, 20 (04) : 291 - 300
  • [2] Thermal fatigue behavior of an iron-based laser sintered material
    Wang, Y.
    Bergstrom, J.
    Burman, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 : 64 - 71
  • [3] Characterization of an iron-based laser sintered material
    Wang, Y
    Bergström, J
    Burman, C
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (01) : 77 - 87
  • [4] Fatigue behaviour of iron based sintered material: a review
    Hadrboletz, A
    Weiss, B
    INTERNATIONAL MATERIALS REVIEWS, 1997, 42 (01) : 1 - 44
  • [5] Investigation into the size effect on four-point bending fatigue tests
    Li, N.
    Molenaar, A. A. A.
    van de Ven, M. F. C.
    Pronk, A. C.
    Wu, S.
    FOUR-POINT BENDING, 2012, : 35 - 47
  • [6] On the difference of fatigue strengths from rotating bending, four-point bending, and cantilever bending tests
    Hassan, T
    Liu, Z
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2001, 78 (01) : 19 - 30
  • [7] Review and prospect of four-point bending fatigue test of asphalt mixture
    Yongjun Meng
    Dichao Liu
    Hongliu Rong
    Xiaolong Yang
    Journal of Road Engineering, 2024, 4 (04) : 446 - 467
  • [8] Review and prospect of four-point bending fatigue test of asphalt mixture
    Meng, Yongjun
    Liu, Dichao
    Rong, Hongliu
    Yang, Xiaolong
    JOURNAL OF ROAD ENGINEERING, 2024, 4 (04) : 446 - 467
  • [9] A computer simulation of four-point bending fatigue of a rear axle assembly
    Firat, Mehmet
    ENGINEERING FAILURE ANALYSIS, 2011, 18 (08) : 2137 - 2148
  • [10] Fatigue data analysis of canine femurs under four-point bending
    Pidaparti, RM
    Akyuz, U
    Naick, PA
    Burr, DB
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2000, 10 (01) : 43 - 50
12345