The NC machining post-processing technology based on UG

被引：2
|
作者：
Liu, Ying [1 ]
Xie, Fan [1 ]
Liu, Jie [2 ]
Wang, Jincheng [1 ]
机构：
[1] Tianjin Univ Technol & Educ, Key Lab High Speed Cutting & Precis Machining, Tianjin, Peoples R China
[2] Acad Mil Transportat, Dept Mil Logist, Tianjin, Peoples R China
来源：
MATERIALS PROCESSING AND MANUFACTURING III, PTS 1-4 | 2013年 / 753-755卷
关键词：
UG CAM; UG/Post; Post Builder; NC machining program;
D O I：
10.4028/www.scientific.net/AMR.753-755.1254
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Post-processing technology is the key to CNC automatic programming technology and an important module of the CAD / CAM system. Post-processing technology converts the NC program that is produced by the CNC automatic programming tool into the file that can be identified by CNC system. Moreover, the generated tool path files must match with the CNC system. Post-processing techniques and UG software are briefly introduced. Using them, a post-processor for FANUC CNC systems is created. The program that generated by the special processor is contrasted with the general processor. The results illustrat that using the dedicated post-processor in engineering applications can improve programming efficiency and processing reliability.
引用
收藏
页码：1254 / +
页数：2
相关论文
共 50 条
  • [1] Application Analysis of machining simulation and post-processing of NC turning center
    Ge, Shuyun
    Qiao, Xianghe
    Ye, Yao
    Chen, Haohao
    Li, Yongxiang
    [J]. Key Engineering Materials, 2014, 620 : 522 - 527
  • [2] Research on simulation of non-orthogonal multi-axis NC machining and post-processing technology based on the coordinate transformation
    [J]. Huang, Y. (63381@163.com), 1600, Trans Tech Publications Ltd (621):
  • [3] Study on post-processing and nonlinear error compensation technology for dual 5-axis linkage NC machining center
    Wu, Yuhou
    Zhao, Dehong
    Ning, Li
    Jing, Sun
    [J]. International Journal of Control and Automation, 2014, 7 (09): : 109 - 120
  • [4] Virtual machining technology based on UG and VERICUT
    Wu, Yuhou
    Gao, Qiang
    Zhao, Dehong
    [J]. MANAGEMENT, MANUFACTURING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 452-453 : 1267 - 1271
  • [5] UG-CAM point processing with NC machining simulation software of integrated application
    Xie, Fan
    Liu, Ying
    Liu, Zhandong
    Sharifa, Mgambo
    [J]. MATERIALS, MECHANICAL ENGINEERING AND MANUFACTURE, PTS 1-3, 2013, 268-270 : 906 - +
  • [6] Optimal Design of Post-processing Technology Based on Bearing Capacity Control
    Tong, Huaifeng
    Xie, Bing
    [J]. TRENDS IN CIVIL ENGINEERING, PTS 1-4, 2012, 446-449 : 1731 - 1734
  • [7] Study on Post-Processing of Five-Axis Cnc Machining
    Zhi Jingzhang
    Ren Chengzu
    Dong Jingchuan
    [J]. FUNCTIONAL MANUFACTURING AND MECHANICAL DYNAMICS II, 2012, 141 : 524 - +
  • [8] Optimal Design Research of Post-processing Technology Based on Settlement Control
    Tong Huaifeng
    Suo Lijun
    [J]. FUTURE MATERIAL RESEARCH AND INDUSTRY APPLICATION, PTS 1 AND 2, 2012, 455-456 : 194 - 198
  • [9] The Post-processing Technology of Ultrasound Scanning Point Position Based on Automatic Programming
    Huang, Ye
    Hao, Juan
    Xiao, Zhen
    Li, Xinliang
    Lu, Zongxing
    Yang, Liu
    [J]. 2014 IEEE FAR EAST FORUM ON NONDESTRUCTIVE EVALUATION/TESTING (FENDT), 2014, : 153 - 157
  • [10] Synthesis and post-processing of nanomaterials using microreaction technology
    Chih-Hung Chang
    Brian K. Paul
    Vincent T. Remcho
    Sundar Atre
    James E. Hutchison
    [J]. Journal of Nanoparticle Research, 2008, 10 : 965 - 980
12345