Formation of edge transport barriers by L-H transition and large reversed plasma current on LHD

On the Large Helical Device (LHD) where nested magnetic surfaces are surrounded by the ergodic field layer, edge transport barrier (ETB) was produced in neutral-beam-injection (NBI) heated plasmas through transition and non-transition processes. The former case is the ETB formation by L-H transition, where characteristics of L-H transition observed in a tokamak plasma are clearly recognized. The confinement improvement is the modest (similar to 10%), compared with the ISS95 international stellarator scaling. The threshold power for the transition is comparable or slightly lower than the ITER scaling law established by tokamaks and compact tori. The ETB is formed inside the ergodic field layer of the vacuum field. The ETB formation destabilizes edge coherent modes such as m/n = 1/1, 2/3 and 1/2, of which rational surfaces are in the magnetic hill. The formed ETB is partially and transiently destroyed by these coherent edge MHD modes and edge localized modes (ELMs) typically observed in Ha signals. The latter ETB is observed in a plasma with large reversed NBI-driven current more than 100 kA at B-t = 1 T. In these plasmas, the edge magnetic shear is enhanced by the current and the rotational transform in the core region is expected to be appreciably reduced. Thus reduced rotational transform in the plasma central region will enhance outward heat and particle fluxes toward ergodic edge layer. The ETB with steep electron temperature gradient up to similar to 5 keV/m is formed by blocking enhanced outward heat flux.