Bond behaviour of austenitic stainless steel reinforced concrete

Stainless steel reinforced concrete has seen a large increase in usage in recent years, in response to the everincreasing demands for structures and infrastructure to be more durable, efficient and sustainable. Currently, existing design standards advise using the same design rules for stainless steel reinforced concrete as traditional carbon steel reinforced concrete, owing to a lack of alternative information. However, this is not based on test or performance data. As such, there is a real need to develop a full and fundamental understanding of the bond behaviour of stainless steel reinforced concrete, to achieve more sustainable and reliable design methods for reinforced concrete structures. This paper investigates the bond behavior of stainless steel reinforced concrete and compares the performance to traditional carbon steel reinforced concrete, through experimental testing and analysis. It also compares the results to existing design rules in terms of bond strength, anchorage length and lap length. It is shown that stainless steel rebar generally develops lower bond strength with the surrounding concrete compared with equivalent carbon steel reinforcement. Moreover, it is shown that existing design codes are very conservative and generally underestimate the actual bond strength by a significant margin. Therefore, following detailed analysis, it is concluded that current design rules can be safely applied for stainless steel rebar, although more accurate and efficient methods can be achieved. Hence, new design parameters are proposed reflecting the bond behaviour of stainless steel rebar, so that more efficient designs can be achieved. Moreover, a summary of recommendations for the codes of practice is provided.