A Study of Steam Turbine Droplet Formation, Shedding and blade Impact

Blade erosion is a serious problem in steam turbines and reduces the life of turbine, requiring periodic maintenance. A fundamental experiment is being performed to evaluate effects of certain control parameters on the droplet formation process and distribution of the shed droplets sizes. Three blade coatings include Epoxy, Teflon(R), Viton(R), three trailing edge geometries and a new and innovative trailing edge effect are to be experimentally studied. Measurements are to be made in a simulated stationary cascade utilizing real turbine components. The condensed liquid film and the large droplets formed on the three coated blades and one original finish blade will be optically measured. A typical cascade is modeled using Volume of Fluid with different surface properties used to model the formation and break-up of a thin water layer into droplets. Droplet distributions for the various conditions will be compared and the best surface finish and configurations will be identified. Most importantly, the reason for a successful configuration will be given, based on the measurement results.