CT-guided robotic needle biopsy of lung nodules with respiratory motion - experimental system and preliminary test

BackgroundCT-guided needle biopsy of lung nodules requires breath holding during needle placement, and is thus inapplicable to patients with difficulty in holding breath. MethodsA robotic needle biopsy technique is introduced, adapting to the patient respiratory pattern and using a robot manipulator to drive the needle towards a moving lung nodule. Based on the nodule respiratory motion model, needle placement is planned to follow an optimal timing and path, and is triggered based on the respiratory phase tracking. An experimental system has been created to study robotic needle placement. ResultsPreliminary phantom tests were conducted based on three representative clinically-collected lung nodule motion paths, using an 18-gauge coaxial needle set. 300 needle paths were implemented. Robotic needle driving was accomplished within 0.4s (a typical respiratory phase), and resulted in a needle placement accuracy of 0.5mm with a standard deviation about 0.1mm over the non-resistance paths. ConclusionThe proposed robotic needle placement technique is promising for accurately biopsying lung nodules under respiratory motion and those with very small sizes. Copyright (c) 2012 John Wiley & Sons, Ltd.