Thermodynamic analysis of processability of Mg-Al-Zn-Mn alloys for rheocasting

被引：5
|
作者：
Guo, H. -M. [1 ,2 ]
Wen, F. -M. [1 ]
Yang, X. -J. [2 ]
Jin, H. -L. [1 ]
Zhang, A. -S. [1 ]
机构：
[1] Nanchang Univ, Sch Mat Sci & Engn, 999 Xuefu Rd, Nanchang 330031, Peoples R China
[2] Nanchang Univ, Key Lab Near Net Forming Jiangxi Prov, Nanchang 330031, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2015年 / 31卷 / 15期
基金：
中国国家自然科学基金;
关键词：
Magnesium alloys; Rheocasting; Thermodynamic calculation; Alloy design; Microstructure; AZ91D MAGNESIUM ALLOY; MECHANICAL-PROPERTIES; MICROSTRUCTURE EVOLUTION; ANGULAR OSCILLATION; ALUMINUM-ALLOY; SOLIDIFICATION; SIMULATION;
D O I：
10.1179/1743284715Y.0000000044
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A two-stage thermodynamic calculation procedure was developed to analyse alloy compositions for rheocasting. Based on Kazakov's criteria, the processability of AZ91, AZ61 and AM60B for rheocasting was investigated. The results show that these alloys do not satisfy selected criteria fully, and only AZ91 is possible to be used for rheocasting with semisolid slurry having lower fraction solid (0.2-0.4). In microstructure produced by rheocasting, the beta-Mg17Al12 phase forms continuous network along primary alpha-Mg gain boundary and is concentrated in this limited contiguous space. The routes to modify and optimise alloy composition were proposed.
引用
收藏
页码：1903 / 1909
页数：7
相关论文
共 50 条
  • [1] Improvement of Commercial Mg-Al-Zn-Mn Alloys by Rolling
    Bozhko, S. A.
    Kolobov, Yu. R.
    Betsofen, S. Ya.
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON STRUCTURAL, MECHANICAL AND MATERIAL ENGINEERING (ICSMME 2015), 2016, 19 : 27 - 30
  • [2] Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation
    Han, Guang
    Liu, Xiangfa
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) : 194 - 197
  • [3] Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation
    Han, Guang
    Liu, Xiangfa
    Journal of Alloys and Compounds, 2009, 487 (1-2): : 194 - 197
  • [4] Influence of Thermomechanical Treatment on the Properties of Alloys of the Mg-Al-Zn-Mn System
    Kug, Kh
    Khalifa, Sh S. M.
    MATERIALS SCIENCE, 2020, 56 (02) : 218 - 223
  • [5] EFFECT OF LOW ADDITIVES OF CALCIUM ON CORROSION RESISTANCE OF ALLOYS OF THE Mg-Al-Zn-Mn SYSTEM
    Koltygin, A. V.
    Bazlova, T. A.
    METAL SCIENCE AND HEAT TREATMENT, 2012, 53 (11-12) : 584 - 588
  • [6] Study on mechanical properties of Mg-Al-Zn-Mn alloys cast by two different methods
    Gao Deming
    Zhang Yuhui
    Hua Qin
    Zhai Qiqie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 507 (1-2): : 1 - 5
  • [7] The Treatment of the Surfaces of Mg-Al-Zn-Mn and Ti-Al-Zr-Nb Alloys by Shot Peening
    Mrva, Peter
    Kottfer, Daniel
    ACTA POLYTECHNICA HUNGARICA, 2011, 8 (02) : 33 - 43
  • [8] Influence of β-Mg17Al12 and Al-Mn intermetallic compounds on the corrosion behaviour of cast and solution treated Mg-Al-Zn-Mn alloys
    Yang, Yang
    Deng, Yangchao
    Zhang, Ruifeng
    Su, Yuqing
    Liu, Siyue
    Gourlay, Christopher M.
    Zeng, Guang
    CORROSION SCIENCE, 2023, 222
  • [9] Strengthening of Mg-Al-Zn-Mn alloy using SiC/Al nanocomposite extrusion
    Emadi, P.
    Andilab, B.
    Borodianskiy, K.
    Ravindran, C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 922
  • [10] Effects of erbium addition on microstructure and mechanical properties of as-cast Mg-Al-Zn-Mn magnesium alloys
    Tezhong Zhuzao Ji Youse Hejin, 2007, 11 (824-826):
12345