Synthesis of TiC/aluminum composite by reactive infiltration process

被引：6
|
作者：
Omura, N [1 ]
Kobashi, M [1 ]
Choh, T [1 ]
Kanetake, N [1 ]
机构：
[1] Nagoya Univ, Grad Sch Engn, Dept Mat Proc Engn, Chikusa Ku, Nagoya, Aichi 4648603, Japan
来源：
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3 | 2002年 / 396-4卷
关键词：
self-propagating high-temperature synthesis(SHS); titanium carbide(TiC); spontaneous infiltration; compressive test; MMC;
D O I：
10.4028/www.scientific.net/MSF.396-402.271
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new process, reactive infiltration, was investigated to synthesize TiC/aluminum composites, in which a combustion reaction and an infiltration of molten metal were combined. Addition of an aluminum powder in the (Ti+C) powder blend can lower the processing temperature to around melting point of aluminum. The optimum aluminum addition ratio in the powder blend was in between 0.8 and 1.2 (Al/Ti molar ratio) to synthesize successfully TiC by the combustion reaction. The in situ synthesized TiC reinforcement was very fine spherical particles with a diameter of 2-5mum. The compressive fracture strength of the composite was about 600MPa at room temperature, and it was not remarkably decreased even at 423K and 573K.
引用
收藏
页码：271 / 276
页数：6
相关论文
共 50 条
  • [1] Synthesis of TiC particle reinforced aluminum composite by reactive infiltration process
    Omura, N
    Kobashi, M
    Choh, T
    Kanetake, N
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2002, 66 (12) : 1317 - 1324
  • [2] Synthesis of TiC/Mg composites with interpenetrating networks by in situ reactive infiltration process
    Chen, LQ
    Dong, Q
    Zhao, MJ
    Bi, J
    Kanetake, N
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 408 (1-2): : 125 - 130
  • [3] Fabrication of Al matrix composite by reactive infiltration process
    Kobashi, M
    Kanetake, N
    Choh, T
    SECOND INTERNATIONAL CONFERENCE ON PROCESSING MATERIALS FOR PROPERTIES, 2000, : 155 - 158
  • [4] Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process
    Kobayashi, Yoshihiro
    Kobashi, Makoto
    Kanetake, Naoyuki
    ADVANCED MATERIALS AND PROCESSING, 2007, 26-28 : 321 - +
  • [5] Preparation of aluminum matrix composite by pressureless infiltration process
    Li, Chongjun
    Ma, Boxin
    Wang, Kangli
    Rare Metals, 1998, 17 (01): : 5 - 9
  • [6] Preparation of Aluminum Matrix Composite by Pressureless Infiltration Process
    李崇俊
    马伯信
    王抗利
    RareMetals, 1998, (01) : 6 - 10
  • [7] Infiltration behavior of in-situ TiC-Al composite by dipping process
    Song, IH
    Hahn, YD
    Kim, HD
    Kim, DK
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2779 - 2782
  • [8] Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers
    Gorji, M. R.
    Edtmaier, C.
    Sanjabi, S.
    MATERIALS & DESIGN, 2017, 125 : 167 - 179
  • [9] Kinetic study of the infiltration of aluminum alloys into TiC preforms
    Contreras, A
    Salazar, M
    León, CA
    Drew, RAL
    Bedolla, E
    MATERIALS AND MANUFACTURING PROCESSES, 2000, 15 (02) : 163 - 182
  • [10] SYNTHESIS OF TIC-NI CERMETS BY ACTIVATED REACTIVE EVAPORATION PROCESS
    NIMMAGADDA, R
    BUNSHAH, RF
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY, 1976, 13 (01): : 532 - 535
12345