Experimental and theoretical investigation of the influence of liquid droplet size on effectiveness of online compressor cleaning for industrial gas turbines

被引:11
|
作者
Agbadede, R. [1 ]
Pilidis, P.
Igie, U. L.
Allison, I.
机构
[1] Cranfield Univ, Dept Energy, Cranfield MK43 0AL, Beds, England
关键词
Fouling; Demineralized water; High injection pressure; Orifice diameter;
D O I
10.1016/j.joei.2014.11.002
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The effectiveness of online compressor washing is site specific and it is determined by several factors, amongst which is liquid injection droplet size that relates to the nozzle orifice diameter and injection pressure. To investigate the influence of liquid injection droplet size on the effectiveness of online compressor washing, three elliptical flat fan nozzles with different orifice diameters were selected, followed by ascertaining the mean droplet sizes for each of the nozzles with the Malvern Spraytec Particle Analyzer. Two of the three nozzles that generated droplet sizes of 55 and 80 mu m were employed to investigate the influence liquid injection droplet on the online compressor washing effectiveness. Prior to the washing effectiveness investigations, the three middle blades of the cascade were fouled in a uniform and repeatable manner, after which washing was conducted with different injection droplet sizes. When the washing effectiveness for droplet sizes of 55.1 and 80.24 mu m were compared on the aerodynamic performance plots of exit flow angle, total pressure loss, and non-dimensional velocity; a slight difference was observed for the two droplet sizes. The washing effectiveness of using liquid injection droplet size of 80.24 mu m produced a lower exit flow angle and total pressure loss coefficient than the droplet size of 55.1 mu m. This implies that the droplet size of 80.24 mu m has a higher momentum, thereby dislodging the particles more easily than the 55.1 mu m droplet size. The reduction in isentropic efficiency and flow capacity obtained from the experimental data for the fouled and washed cases were used as input into Turbomatch to simulate the effects of washing with different fluid injection droplet sizes. Blades washed with a droplet size of 80.24 mu m produced a higher recovery of power output and efficiency from the fouled case than the ones washed with a droplet size of 55.1 mu m. (C) 2014 Energy Institute. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:414 / 424
页数:11
相关论文
共 47 条
  • [1] STUDY OF WASH FLUID CLEANING EFFECTIVENESS ON INDUSTRIAL GAS TURBINE COMPRESSOR FOULANTS
    Roupa, Agbadede
    Pilidis, Pericles
    Allison, Isaiah
    Lambart, Paul
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 5A, 2013,
  • [2] Experimental Investigation of Wash Fluid Preheating on the Effectiveness of Online Compressor Washing in a Suction Tunnel Compressor Cascade
    Agbadede, R.
    Kainga, B.
    INTERNATIONAL JOURNAL OF THERMODYNAMICS, 2021, 24 (03) : 194 - 202
  • [3] Investigation of fatigue failures of titanium alloy blades used in compressor modules of aeroderivative industrial gas turbines
    Jasiczek M.
    Szczéniak D.
    Kaczorowski J.
    Innocenti M.
    Journal of Failure Analysis and Prevention, 2013, 13 (6) : 689 - 696
  • [4] Experimental and Theoretical Investigation of Droplet Dispersion in Venturi Scrubbers with Axial Liquid Injection
    Talaie, Mohammad Reza
    Mokhtarian, Nader
    Talaei, Amir Reza
    Karimikhosroabadi, Mehdi
    Sadeghi, Farhad
    CHEMICAL ENGINEERING & TECHNOLOGY, 2009, 32 (05) : 798 - 804
  • [5] The instability and droplet size distribution of liquid-liquid coaxial swirling spray: An experimental investigation
    Ding, Jia-Wei
    Li, Guo-Xiu
    Yu, Yu-Song
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2017, 82 : 166 - 173
  • [6] Influence of droplet separation efficiency from gas after contact with liquid in spray scrubbers on gas cleaning efficiency
    Wroclaw University of Technology, Institute of Environmental Engineering, Wybrzeze Wyspiańskiego 27, 50-377 Wroclaw, Poland
    Environ. Prot. Eng., 2006, 4 (59-66):
  • [7] Experimental Investigation of Mechanisms of Droplet Entrainment in Annular Gas-Liquid Flows: A Review
    Cherdantsev, Andrey V.
    WATER, 2022, 14 (23)
  • [8] A NUMERICAL AND EXPERIMENTAL INVESTIGATION OF A GAS PROPELLED LIQUID DROPLET IMPINGING ONTO A HEATED SURFACE
    Diaz, Andres
    Ortega, Alfonso
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 10, PTS A AND B, 2012, : 187 - 196
  • [9] Experimental investigation of droplet size influence on low pressure steam turbine blade erosion
    Ahmad, M.
    Schatz, M.
    Casey, M. V.
    WEAR, 2013, 303 (1-2) : 83 - 86
  • [10] Influence of Droplet Size Distribution on Liquid Dispersion in a Venturi Scrubber: Experimental Measurements and CFD Simulation
    Guerra, Vadila G.
    Achiles, Ana Elisa
    Bettega, Rodrigo
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2017, 56 (08) : 2177 - 2187