ULTRASONIC ATTENUATION MEASUREMENTS IN THERMALLY DEGRADED 2205 DUPLEX STAINLESS STEEL

被引：0
|
作者：
Ruiz, A.
Ortiz, N.
Carreon, H.
Sanchez, A.
机构：
来源：
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 28A AND 28B | 2009年 / 1096卷
关键词：
Longitudinal Wave Attenuation; Recrystallization; Ferrite Transformation;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ultrasonic attenuation plays an important role in materials characterization of metal components. This paper present data and discuss ultrasonic attenuation variations in a 2205 duplex stainless steel aged isothermally at 700 degrees C and 900 degrees C for different time intervals. Attenuation measurements as function of frequency where performed using pulse-echo immersion method and broad band planar transducers. Evidence is found of changes in the attenuation coefficient as aging time increases. The corresponding microstructure of aged specimens was observed and impact toughness was measured. Comparison is made with measurements of ferrite content for the two temperatures and different aging times.
引用
收藏
页码：1246 / 1251
页数：6
相关论文
共 50 条
  • [1] Utilization of Ultrasonic Measurements for Determining the Variations in Microstructure of Thermally Degraded 2205 Duplex Stainless Steel
    Alberto Ruiz
    Noemi Ortiz
    Hector Carreón
    Carlos Rubio
    Journal of Nondestructive Evaluation, 2009, 28
  • [2] Utilization of Ultrasonic Measurements for Determining the Variations in Microstructure of Thermally Degraded 2205 Duplex Stainless Steel
    Ruiz, Alberto
    Ortiz, Noemi
    Carreon, Hector
    Rubio, Carlos
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2009, 28 (3-4) : 131 - 139
  • [3] Influence of heat treatment on the microstructure, ultrasonic attenuation and hardness of SAF 2205 duplex stainless steel
    Vijayalakshmi, K.
    Muthupandi, V.
    Jayachitra, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529 : 447 - 451
  • [4] Quantification of sigma-phase evolution in thermally aged 2205 duplex stainless steel
    Warren, A. D.
    Harniman, R. L.
    Guo, Z.
    Younes, C. M.
    Flewitt, P. E. J.
    Scott, T. B.
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (02) : 694 - 707
  • [5] Quantification of sigma-phase evolution in thermally aged 2205 duplex stainless steel
    A. D. Warren
    R. L. Harniman
    Z. Guo
    C. M. Younes
    P. E. J. Flewitt
    T. B. Scott
    Journal of Materials Science, 2016, 51 : 694 - 707
  • [6] Corrosion behavior of 2205 duplex stainless steel
    Platt, JA
    Guzman, A
    Zuccari, A
    Thornburg, DW
    Rhodes, BF
    Oshida, Y
    Moore, BK
    AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 1997, 112 (01) : 69 - 79
  • [7] Surface Roughness Increasing of 2205 Duplex Stainless Steel Using Ultrasonic Cavitation Process
    Alkhaleel, F.
    Allahkaram, S. R.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (02): : 569 - 579
  • [8] Application of ultrasonic methods for early detection of thermal damage in 2205 duplex stainless steel
    Ruiz, A.
    Ortiz, N.
    Medina, A.
    Kim, J. -Y.
    Jacobs, L. J.
    NDT & E INTERNATIONAL, 2013, 54 : 19 - 26
  • [9] Surface Roughness Increasing of 2205 Duplex Stainless Steel Using Ultrasonic Cavitation Process
    F. Alkhaleel
    S. R. Allahkaram
    Metallurgical and Materials Transactions A, 2024, 55 : 569 - 579
  • [10] Hot Deformation Behavior of Duplex Stainless Steel 2205
    Zhang, Yong-jun
    Dong, Yuan
    Hu, Jie-ren
    Zhang, Hui
    Han, Jing-tao
    METAL SCIENCE AND HEAT TREATMENT, 2024, 65 (9-10) : 624 - 628
12345