Using metal carbonates MCO3 (M = Mg2+, Ca2+, Sr2+ and Ba2+) as Auxiliary Compounds to Prepare the YSZ Based Potentiometric CO2 Sensor

被引:1
|
作者
Wang, Guangwei [1 ,3 ]
Chen, Hongzhen [2 ,3 ]
Wu, Yuanhui [1 ]
机构
[1] Zunyi Normal Univ, Coll Chem & Chem Engn, Zunyi 563006, Guizhou, Peoples R China
[2] China Univ Geosci Beijing, MOE Key Lab Groundwater Circulat & Environm Evolu, Beijing 100083, Peoples R China
[3] Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol CIGIT, Chongqing 400714, Peoples R China
来源
基金
中国国家自然科学基金;
关键词
BaCO3-Li2CO3-Nd2O3; auxiliary sensing compound; YSZ; CO2; sensor; ANION CONDUCTING SOLIDS; DIOXIDE GAS SENSOR; ELECTROCHEMICAL CO2; SENSING PROPERTIES; STABILITY; CATION; ELECTROLYTE; COMBINATION;
D O I
10.20964/2020.11.73
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Different insoluble carbonates (MgCO3, CaCO3, SrCO3, BaCO3) were introduced into a base material of Li2CO3-Nd2O3, and the formed ternary compounds worked as an auxiliary sensing material in a potentiometric CO2 sensor. This sensor had YSZ and Au as its solid electrolyte and reference electrode, respectively. By detecting the CO2 response with each as-prepared sensor before and after a water vapour treatment, the characteristics of the auxiliary sensing compounds were considered. Experimental results indicated that the sensor prepared by the BaCO3-Li2CO3-Nd2O3 compound exhibited a stable and reproducible response to CO2 gas over a wide range of 271-576802 ppm. Interestingly, this type of sensor worked well even after a 12-h water vapour treatment at 3 MPa. After further investigations, this sensor may potentially be applied for the practical in situ detection of the CO2 concentration in a combustion exhaust gas atmosphere.
引用
收藏
页码:11046 / 11057
页数:12
相关论文
共 50 条