Millisecond fibre laser trepanning drilling of angular holes

被引：20
|
作者：
Marimuthu, S. [1 ]
Antar, M. [1 ]
Dunleavey, J. [1 ]
Hayward, P. [1 ]
机构：
[1] Mfg Technol Ctr, Ansty Business Pk, Coventry, W Midlands, England
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2019年 / 102卷 / 9-12期
基金：
英国工程与自然科学研究理事会;
关键词：
Drilling; Laser; Angular hole; Fibre; Trepanning; Millisecond;
D O I：
10.1007/s00170-019-03389-8
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This paper aims to investigate the basic characteristics of millisecond (ms) pulsed fibre laser drilling of 0.8 mm diameter angular holes (30 degrees to the surface) in a 2 mm thick aerospace nickel superalloy (resultant hole length of 4mm). Experiments have been conducted to understand the influence of various process parameters on the hole quality, including gas pressure, nozzle-workpiece distance, laser beam focus position, trepanning speed, number of trepanning orbits, pulse energy, pulse duration and pulse frequency. The results suggest that high quality and high productivity can be achieved with millisecond fibre laser drilling, especially when compared to traditional Nd:YAG laser drilling. A new trepanning drilling method for achieving high-quality laser drilling was proposed and evaluated.
引用
收藏
页码：2833 / 2843
页数：11
相关论文
共 50 条
  • [1] Millisecond fibre laser trepanning drilling of angular holes
    S. Marimuthu
    M. Antar
    J. Dunleavey
    P. Hayward
    The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2833 - 2843
  • [2] Millisecond fibre laser drilling of thick-section aerospace alloy
    Sundar Marimuthu
    Helen Elkington
    Bethan Smith
    The International Journal of Advanced Manufacturing Technology, 2022, 119 : 3437 - 3447
  • [3] Millisecond fibre laser drilling of thick-section aerospace alloy
    Marimuthu, Sundar
    Elkington, Helen
    Smith, Bethan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (5-6): : 3437 - 3447
  • [4] Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes
    Nicolau Iralal Morar
    Rajkumar Roy
    Jörn Mehnen
    Sundar Marithumu
    Simon Gray
    Tracey Roberts
    John Nicholls
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 4059 - 4070
  • [5] Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes
    Morar, Nicolau Iralal
    Roy, Rajkumar
    Mehnen, Jorn
    Marithumu, Sundar
    Gray, Simon
    Roberts, Tracey
    Nicholls, John
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12): : 4059 - 4070
  • [6] Effects of Laser Operating Parameters on Hole Characteristics When Fibre Laser Trepanning Drilling of Glazed Ceramic Tiles
    Kalvettukaran, P. K.
    Reaz, S.
    Misra, D.
    LASERS IN ENGINEERING, 2024, 57 (1-3) : 43 - 59
  • [7] Laser Drilling of Via Micro-holes in Single-crystal Semiconductor Substrates using a 1070 nm Fibre Laser with Millisecond Pulse Widths
    Maclean, Jessica O.
    Hodson, Jonathan R.
    Voisey, K. T.
    INDUSTRIAL LASER APPLICATIONS SYMPOSIUM (ILAS 2015), 2015, 9657
  • [8] PRECISION LASER MACHINING: DRILLING BY TREPANNING.
    Anon
    1973, 5 (05): : 31 - 33
  • [9] Laser drilling of micro-holes in single crystal silicon, indium phosphide and indium antimonide using a continuous wave (CW) 1070 nm fibre laser with millisecond pulse widths
    Maclean, Jessica O.
    Tangkijcharoenchai, C.
    Coomber, Stuart
    Voisey, Katy T.
    10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018], 2018, 74 : 407 - 412
  • [10] Experimental study of fibre laser microdrilling of aerospace superalloy by trepanning technique
    Tagliaferri, F.
    Genna, S.
    Leone, C.
    Palumbo, B.
    De Chiara, G.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (9-12): : 3203 - 3210
12345