Theoretical Evaluation of an Organic Phase Change Material (PCM)-Inserted Dual-Functional Adsorbent for the Recovery of Heat of Adsorption

被引:7
|
作者
Choi, Jihye [1 ]
Yoshie, Kenichi [1 ]
Moteki, Takahiko [2 ]
Ogura, Masaru [2 ]
机构
[1] Univ Tokyo, Dept Chem Syst Engn, Tokyo 1138656, Japan
[2] Univ Tokyo, Inst Ind Sci, Tokyo 1538505, Japan
关键词
PERFORMANCE IMPROVEMENT; ENERGY-STORAGE; NANOSPACE;
D O I
10.1021/acs.iecr.9b00198
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Inserting a phase change material (PCM) directly into an adsorbent is proposed, for the first time, as a novel method for recovering the generated heat of adsorption. In the PCM-inserted adsorbent, adsorption and recovery of the heat of adsorption can occur simultaneously. As a conceptual model, PCM-inserted mesoporous silica SBA-15 was experimentally prepared, and a dehumidifying fixed-bed adsorption process was simulated on the basis of the experimental data. The simulation was run for a theoretical investigation under adiabatic conditions over five types of adsorbents with/without PCM. The PCM-inserted SBA-15 showed isothermal behavior in a first few minutes owing to the heat recovery effect of the PCM, demonstrating the highest performance.
引用
收藏
页码:10114 / 10118
页数:5
相关论文
共 10 条
  • [1] Phase Change Material-Containing Mesoporous Zeolite Composite for Adsorption Heat Recovery
    Choi, Jihye
    Valtchev, Valentin
    Moteki, Takahiko
    Ogura, Masaru
    ADVANCED MATERIALS INTERFACES, 2021, 8 (04)
  • [2] Design and fabrication of dual-functional microcapsules containing phase change material core and zirconium oxide shell with fluorescent characteristics
    Zhang, Ying
    Wang, Xiaodong
    Wu, Dezhen
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 133 : 56 - 68
  • [3] Electromagnetic wave absorption and heat storage dual-functional cement composites incorporated with carbon nanotubes and phase change microcapsule
    Xie, Shuai
    Ma, Chao
    Ji, Zhijiang
    Wu, Zihao
    Si, Tiantian
    Wang, Yongchao
    Wang, Jing
    JOURNAL OF BUILDING ENGINEERING, 2023, 67
  • [4] Experimental and Theoretical Investigation of the Natural Convection Heat Transfer Coefficient in Phase Change Material (PCM) Based Fin-and-Tube Heat Exchanger
    Pakalka, Saulius
    Valancius, Kestutis
    Streckiene, Giedre
    ENERGIES, 2021, 14 (03)
  • [5] Circulating fluidized bed heat recovery/storage and its potential to use coated phase-change-material (PCM) particles
    Pitie, F.
    Zhao, C. Y.
    Baeyens, J.
    Degreve, J.
    Zhang, H. L.
    APPLIED ENERGY, 2013, 109 : 505 - 513
  • [6] Design and synthesis of organo-silica shell based dual-functional microencapsulated phase change material for thermal regulating systems
    Wei, Jing
    Wang, Tao
    Li, Hui
    Lu, Qu-Liang
    Jiang, Yong
    CHEMICAL PAPERS, 2018, 72 (04) : 1055 - 1064
  • [7] Design and synthesis of organo-silica shell based dual-functional microencapsulated phase change material for thermal regulating systems
    Jing Wei
    Tao Wang
    Hui Li
    Qu-Liang Lu
    Yong Jiang
    Chemical Papers, 2018, 72 : 1055 - 1064
  • [8] Study on thermal energy storage properties of organic phase change material for waste heat recovery applications
    Moldgy, Ankit
    Parameshwaran, R.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (08) : 16840 - 16848
  • [9] Fabrication of high-crystallinity hydrazone-linked fluorescent covalent organic framework and its sulfonated material for the design of sensing and adsorption dual-functional platforms
    Yang, Yulian
    Wang, Dandan
    Liu, Qiuyi
    Zou, Yuemeng
    Wang, Mingyue
    Li, Lingling
    Lan, Yue
    Xiao, Yuqiang
    Hu, Jiaqi
    Zhang, Haibin
    Hu, Menglan
    Zhang, Kailian
    Wu, Jianming
    Gao, Die
    SEPARATION AND PURIFICATION TECHNOLOGY, 2025, 354
  • [10] Performance evaluation and multi-objective optimization of a hybrid earth-air heat exchanger and building-integrated photovoltaic/thermal system with phase change material and exhaust air heat recovery
    Shahsavar, Amin
    Azimi, Neda
    JOURNAL OF BUILDING ENGINEERING, 2024, 90