Performance optimization of absorption refrigeration systems using Taguchi, ANOVA and Grey Relational Analysis methods

被引:98
|
作者
Canbolat, A. S. [1 ]
Bademlioglu, A. H. [2 ]
Arslanoglu, N. [1 ]
Kaynakli, O. [1 ]
机构
[1] Bursa Uludag Univ, Fac Engn, Dept Mech Engn, Bursa, Turkey
[2] Bursa Tech Univ, Fac Engn & Nat Sci, Dept Energy Syst Engn, Bursa, Turkey
关键词
Absorption refrigeration system; Taguchi method; Grey relational analysis; ANOVA; COP; eCOP; FLAT-PLATE COLLECTOR; HEAT-EXCHANGER; THERMODYNAMIC ANALYSIS; EXERGY ANALYSES; PARAMETERS; ENERGY; DESIGN; CYCLE; AIR;
D O I
10.1016/j.jclepro.2019.05.020
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
There are various factors having an impact on the energetic and exergetic performance (i.e., COP and eCOP) of an absorption refrigeration systems (ARS) such as the temperatures of the generator, condenser, evaporator and absorber, effectiveness of solution, refrigerant and solution-refrigerant heat exchangers and isentropic efficiency of the solution pump. Many studies have focused on these process parameters, but the importance order and contribution ratios of the parameters due to thermodynamic performance have not been determined by using statistical methods. Firstly, in this study, cycles' thermodynamic model is established and the variation of the COP and eCOP are calculated for different working conditions with different parameters ranges. The effects of these parameters on the COP and eCOP are examined separately on a statistical basis. The importance order of the parameters are determined by using Taguchi and ANOVA methods and the results are compared. Optimum operating conditions are determined by means of statistical analysis for the COP and eCOP. Under these operating conditions, the COP and eCOP of the system are calculated as 0.697 and 0.2829, respectively. Furthermore, for the simultaneous maximization of these two performance indicators, Taguchi-Grey Relational Analysis (GRA) is used. By using this analysis, importance order of the examined parameters on multiple performance characteristics are determined. The absorber and evaporator temperatures are the most efficient parameters on multiple performance characteristics with a contribution ratio of 29.66% and 26.34% of the total effect while the least efficient parameters are the pump efficiency and effectiveness of solution refrigerant heat exchanger with a contribution ratio of 0.48% and 2.41%, respectively. For the best condition considering the multiple performance characteristics, COP and eCOP of the system are found as 0.6255 and 0.2829, respectively. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:874 / 885
页数:12
相关论文
共 50 条
  • [1] Performance optimization and parametric evaluation of the cascade vapor compression refrigeration cycle using Taguchi and ANOVA methods
    Ustaoglu, Abid
    Kursuncu, Bilal
    Alptekin, Mustafa
    Gok, M. Sabri
    [J]. APPLIED THERMAL ENGINEERING, 2020, 180
  • [2] A novel design to optimize the optical performances of parabolic trough collector using Taguchi, ANOVA and grey relational analysis methods
    Ben Taher, M.A.
    Pelay, U.
    Russeil, S.
    Bougeard, D.
    [J]. Renewable Energy, 2023, 216
  • [3] MULTI-OBJECTIVE OPTIMIZATION OF PARAMETERS AFFECTING THE PERFORMANCE OF PARABOLIC SOLAR COLLECTORS BY TAGUCHI, ANOVA, AND GREY RELATIONAL ANALYSIS METHOD
    Dundar, Ahmet
    Arslanoglu, Nurullah
    [J]. HEAT TRANSFER RESEARCH, 2023, 54 (17) : 37 - 51
  • [4] Optimization of the performance of riprap apron to protect spur dikes against scouring using Taguchi and grey relational analysis methods
    Amin Atarodi
    Hojat Karami
    Abdollah Ardeshir
    Khosrow Hosseini
    David Lampert
    [J]. Sādhanā, 48
  • [5] Optimization of the performance of riprap apron to protect spur dikes against scouring using Taguchi and grey relational analysis methods
    Atarodi, Amin
    Karami, Hojat
    Ardeshir, Abdollah
    Hosseini, Khosrow
    Lampert, David
    [J]. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2023, 48 (01):
  • [6] Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
    Jung, Jong Hyuk
    Kwon, Won Tae
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (05) : 1083 - 1090
  • [7] Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
    Jong Hyuk Jung
    Won Tae Kwon
    [J]. Journal of Mechanical Science and Technology, 2010, 24 : 1083 - 1090
  • [8] Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis
    Tzeng, Chorng-Jyh
    Lin, Yu-Hsin
    Yang, Yung-Kuang
    Jeng, Ming-Chang
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (06) : 2753 - 2759
  • [9] Multiple performance optimization of electrochemical drilling of Inconel 625 using Taguchi based Grey Relational Analysis
    Manikandan, N.
    Kumanan, S.
    Sathiyanarayanan, C.
    [J]. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2017, 20 (02): : 662 - 671
  • [10] Optimization of micro-EDM with multiple performance characteristics using Taguchi method and Grey relational analysis
    Natarajan, N.
    Arunachalam, R. M.
    [J]. JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2011, 70 (07): : 500 - 505