Fastening the amorphization process of chalcogenide glasses by mechanical alloying

被引：2

作者：

Calvez, Laurent ^{[1
]}

Novikova, Anna ^{[1
]}

Potapov, Alexander ^{[2
]}

Velmuzhov, Alexander ^{[2
]}

机构：

[1] Univ Rennes 1, Inst Sci Chim Rennes, Equipe Verres & Ceram, UMR CNRS 6226, 263 Ave Gen Leclerc, F-35042 Rennes, France

[2] Russian Acad Sci, GG Devyatykh Inst Chem High Pur Subst, 49 Tropinin Str, Nizhnii Novgorod 603950, Russia

来源：

OPTICAL COMPONENTS AND MATERIALS XIV | 2017年 / 10100卷

关键词：

mechanical-alloying; chalcogenide glasses; infrared; sintering; NANOSTRUCTURED MATERIALS; MASS-SPECTROMETRY; CERAMICS; GERMANIUM;

D O I：

10.1117/12.2246756

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the possibility to fasten the amorphization process of chalcogenide glasses by mechanical alloying is described. Several ways were investigated to optimize the time of milling permitting a faster production and also avoiding a higher contamination. Thus, the influence of gallium addition which could act as a solvent because of its low melting point and its low vapor pressure has been studied. Then, two conventional ways of milling were compared using a PM100 planetary grinder and a SPEX MILL 8000D, which present two different ways of rotation. Finally, the pollution by WC during mechanical alloying and by carbon during sintering has been investigated by LMS measurements.

引用

页数：9

共 50 条

[1] AMORPHIZATION BY MECHANICAL ALLOYING
KIMURA, H
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S638 - S638
[2] AMORPHIZATION BY MECHANICAL ALLOYING
KOCH, CC
JOURNAL OF NON-CRYSTALLINE SOLIDS, 1990, 117 : 670 - 678
[3] Process of amorphization induced by mechanical alloying of iron with tungsten and niobium
Jartych, E
Oleszak, D
Zurawicz, JK
ACTA PHYSICA POLONICA A, 2001, 100 (05) : 731 - 736
[4] STRUCTURAL-CHANGE DURING THE AMORPHIZATION PROCESS BY MECHANICAL ALLOYING
FUKUNAGA, T
PHYSICA B-CONDENSED MATTER, 1995, 213 : 518 - 522
[5] Amorphization of Ge-GeSe mixtures in mechanical alloying process
Shirakawa, Y
Matsuda, T
Tani, Y
Shimosaka, A
Hidaka, J
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2001, 293 : 764 - 768
[6] ON THE AMORPHIZATION REACTIONS OF CUTI BY MECHANICAL ALLOYING
COCCO, G
SOLETTA, I
ENZO, S
MAGINI, M
COWLAM, N
JOURNAL DE PHYSIQUE, 1990, 51 (14): : C4181 - C4187
[7] STUDY OF THE MECHANISM OF AMORPHIZATION BY MECHANICAL ALLOYING
PETZOLDT, F
SCHOLZ, B
KUNZE, HD
MATERIALS LETTERS, 1987, 5 (7-8) : 280 - 284
[8] Molecular simulation of amorphization by mechanical alloying
Lund, AC
Schuh, CA
ACTA MATERIALIA, 2004, 52 (08) : 2123 - 2132
[9] AMORPHIZATION OF INTERMEDIATE PHASES BY MECHANICAL ALLOYING MILLING
KOCH, CC
JANG, JSC
LEE, PY
NEW MATERIALS BY MECHANICAL ALLOYING TECHNIQUES, 1989, : 101 - 110
[10] AMORPHIZATION BY MECHANICAL ALLOYING - THE ROLE OF MIXTURES OF INTERMETALLICS
LEE, PY
JANG, J
KOCH, CC
JOURNAL OF THE LESS-COMMON METALS, 1988, 140 : 73 - 83

← 1 2 3 4 5 →