Mathematical Modeling of Postcombustion in an Electric Arc Furnace (EAF)

被引：1
|
作者：
Arzpeyma, Niloofar [1 ]
Ersson, Mikael [1 ]
Jonsson, Par G. [1 ]
机构：
[1] Royal Inst Technol KTH, Dept Mat Sci & Engn, S-10044 Stockholm, Sweden
来源：
METALS | 2019年 / 9卷 / 05期
关键词：
EAF; postcombustion; CFD;
D O I：
10.3390/met9050547
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Numerical modeling was used to study the capability of postcombustion in an electric arc furnace (EAF) equipped with virtual lance burners. The CO flow rate at the molten bath surface was estimated using the off-gas data obtained close to the outlet of an EAF. Then, the effect of the secondary oxygen flow rate on postcombustion was studied. The results show a CO flow rate of 0.6 kgs(-1) and 0.8 kgs(-1) for operation modes of burner and burner + lancing. Increase of the secondary oxygen flow rates of 60% and 70% result in 17% and 7% increase in the postcombustion ratio (PCR) for the burner and burner lancing modes, respectively.
引用
收藏
页数：14
相关论文
共 50 条
  • [1] Review on Modeling and Simulation of the Electric Arc Furnace (EAF)
    Odenthal, Hans-Juergen
    Kemminger, Andreas
    Krause, Fabian
    Sankowski, Lukas
    Uebber, Norbert
    Vogl, Norbert
    [J]. STEEL RESEARCH INTERNATIONAL, 2018, 89 (01)
  • [2] IMPROVING ELECTRIC ARC FURNACE (EAF) OPERATION THROUGH MATHEMATICAL MODELLING
    Ioana, Adrian
    Preda, Anda
    Besea, Liviu
    Moldovan, Petru
    Constantin, Nicolae
    [J]. UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2016, 78 (03): : 185 - 194
  • [3] Mathematical Modeling and Experimental Validation of an Electric Arc Furnace
    Logar, Vito
    Dovzan, Dejan
    Skrjanc, Igor
    [J]. ISIJ INTERNATIONAL, 2011, 51 (03) : 382 - 391
  • [4] Modeling dust evolution in Electric Arc Furnace (EAF) fume extraction system
    Guezennec, A. G.
    Patisson, F.
    Sessiecq, P.
    Huber, J. C.
    Ablitzer, D.
    [J]. SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 5: NEW, IMPROVED AND EXISTING TECHNOLOGIES: IRON AND STEEL AND RECYCLING AND WASTE TREATMENT, 2006, : 241 - 250
  • [5] A review of simulation and numerical modeling of electric arc furnace (EAF) and its processes
    Abadi, Mahmoud Makki
    Tang, Hongyan
    Rashidi, Mohammad Mehdi
    [J]. HELIYON, 2024, 10 (11)
  • [6] Mathematical Modeling of the Melting Rate of Metallic Particles in the Electric Arc Furnace
    Gonzalez, O. J. P.
    Ramirez-Argaez, Marco A.
    Conejo, A. N.
    [J]. ISIJ INTERNATIONAL, 2010, 50 (01) : 9 - 16
  • [7] Modeling of the Electric Arc Behavior of the Electric Arc Furnace
    Panoiu, Manuela
    Panoiu, Caius
    Ghiormez, Loredana
    [J]. SOFT COMPUTING APPLICATIONS, 2013, 195 : 261 - 271
  • [8] Modeling parameters of arc of electric arc furnace
    Khrestin, R. N.
    [J]. ELECTRICAL ENGINEERING & ELECTROMECHANICS, 2015, (04) : 45 - 48
  • [9] Computational fluid-dynamics simulation of postcombustion in the electric-arc furnace
    Li, Y
    Fruehan, RJ
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2003, 34 (03): : 333 - 343
  • [10] Computational fluid-dynamics simulation of postcombustion in the electric-arc furnace
    Yun Li
    Richard J. Fruehan
    [J]. Metallurgical and Materials Transactions B, 2003, 34 : 333 - 343
12345