Hardening of the Surface Layers of Commercial Pure Titanium VT1-0 under Combined Treatment

被引：0
|
作者：
Bashchenko, Lyudmila P. [1 ]
Gromov, Viktor E. [1 ]
Budovskikh, Evgenii A. [1 ]
Ivanov, Yurii F. [2 ,3 ]
Soskova, Nina A. [1 ]
机构：
[1] Siberian State Ind Univ, Novokuznetsk 654007, Russia
[2] Inst High Current Elect SB RAS, Tomsk 634055, Russia
[3] Natl Res Tomsk State Univ, Tomsk 634050, Russia
来源：
INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2015 | 2015年 / 1683卷
关键词：
D O I：
10.1063/1.4932712
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The treatment of VT1-0 titanium samples was carried out by concentrated energy fluxes. The combined treatment included surface carburizing with the joint use of powder samples of compounds with high physical and mechanical properties (namely, titanium diboride TiB2, silicon carbide SiC and zirconium oxide ZrO2) and subsequent electron beam treatment of surface layers formed in electroexplosive treatment. The combined treatment of surface layers resulted in the multifold increase in microhardness, which reduces depending on the depth of hardening zone. After electron-beam treatment, the depth of hardening zone is increased. During electron-beam treatment, the two-layer hardening zone forms.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Mechanical behavior of hydrogenated commercial VT1-0 titanium
    Panin, AV
    [J]. MATERIALS SCIENCE, 2004, 40 (06) : 756 - 763
  • [2] Mechanical Behavior of Hydrogenated Commercial VT1-0 Titanium
    A. V. Panin
    [J]. Materials Science, 2004, 40 : 756 - 763
  • [3] Structure and Properties of Surface Layers of Sintered Powder Titanium VT1-0 After Laser Treatment
    Gaivoronskii, I. V.
    Girzhon, V. V.
    Skrebtsov, A. A.
    Ovchinnikov, A. V.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2014, 56 (1-2) : 57 - 59
  • [4] Structure and Properties of Surface Layers of Sintered Powder Titanium VT1-0 After Laser Treatment
    I. V. Gaivoronskii
    V. V. Girzhon
    A. A. Skrebtsov
    A. V. Ovchinnikov
    [J]. Metal Science and Heat Treatment, 2014, 56 : 57 - 59
  • [5] COMPOSITION OF SURFACE LAYERS ON VT1-0 TITANIUM BEFORE AND AFTER CHEMICAL POLISHING
    Dontsov, M. G.
    Kuzmicheva, E. V.
    Parfenyuk, V. I.
    [J]. IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA I KHIMICHESKAYA TEKHNOLOGIYA, 2013, 56 (10): : 91 - +
  • [6] Endurance of VT1-0 titanium alloy subjected to solid-solution surface hardening
    Pichuhin, AT
    Fedirko, VM
    Luk'yanenko, OH
    Onuferko, VS
    [J]. MATERIALS SCIENCE, 2005, 41 (03) : 418 - 422
  • [7] Endurance of VT1-0 Titanium Alloy Subjected to Solid-Solution Surface Hardening
    A. T. Pichuhin
    V. M. Fedirko
    O. H. Luk'yanenko
    V. S. Onuferko
    [J]. Materials Science, 2005, 41 : 418 - 422
  • [8] Formation of nanocomposite layers at the surface of VT1-0 titanium in electroexplosive carburization and electron-beam treatment
    Yu. F. Ivanov
    E. A. Budovskikh
    V. E. Gromov
    L. P. Bashchenko
    N. A. Soskova
    S. V. Raikov
    [J]. Steel in Translation, 2012, 42 (6) : 499 - 501
  • [9] MORPHOLOGY OF HYDROXYAPATITE COATINGS FORMED ON VT1-0 TITANIUM AS A RESULT OF COMBINED TREATMENT
    Tkachuk, O. V.
    Proskurnyak, R. V.
    Holovchuk, M. Ya.
    [J]. MATERIALS SCIENCE, 2022, 58 (01) : 75 - 79
  • [10] Morphology of Hydroxyapatite Coatings Formed on VT1-0 Titanium as a Result of Combined Treatment
    O. V. Tkachuk
    R. V. Proskurnyak
    M. Ya. Holovchuk
    [J]. Materials Science, 2022, 58 : 75 - 79
12345