Investigation on Electromagnetic Performance of Induction Motor with Rotor Bar Faults considering Motor Current Signals

被引:2
|
作者
Park, Yu-Seop [1 ]
机构
[1] Korea Natl Univ Transportat, Dept Elect Engn, Chungju, South Korea
关键词
current; fault; induction motor; torque; rotor; CURRENT SIGNATURE ANALYSIS; ONLINE DIAGNOSIS; DRIVES; MACHINE;
D O I
10.4316/AECE.2020.04005
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
This paper deals with electromagnetic torque and current characteristics of an induction motor with rotor bar breakage, and electromagnetic field analysis based on finite element method and motor current signal analysis is performed according to various load conditions. Although various monitoring techniques of rotor bar breakages were dealt with in previous studies using MCSA, they cannot be, in fact, applied to every case. Therefore, in this paper, electromagnetic field analysis of induction motor with various rotor bar fault conditions is performed to establish fault monitoring criteria in MCSA method. This study employs 0.4(kW) squirrel cage induction motor, and experimentally measured torque and current supports the analysis results.
引用
收藏
页码:37 / 44
页数:8
相关论文
共 50 条
  • [1] Diagnosis of eccentricity and broken rotor bar related faults of induction motor by means of motor current signature analysis
    Ishkova, Ielyzaveta
    Vitek, Ondrej
    [J]. PROCEEDINGS OF THE 2015 16TH INTERNATIONAL SCIENTIFIC CONFERENCE ON ELECTRIC POWER ENGINEERING (EPE), 2015, : 682 - 686
  • [2] Investigation of rotor thermal stress in squirrel cage induction motor with broken bar faults
    Xie, Ying
    Wang, Ze
    Shan, Xueting
    Li, Yangyang
    [J]. COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2016, 35 (05) : 1865 - 1886
  • [3] Effectiveness of Vibration and Current Monitoring in detecting Broken Rotor Bar and Bearing Faults in an Induction Motor
    Kumar, T. Ch. Anil
    Singh, Gurmeet
    Naikan, V. N. A.
    [J]. 2016 IEEE 6TH INTERNATIONAL CONFERENCE ON POWER SYSTEMS (ICPS), 2016,
  • [4] Predictive torque control of induction motor for rotor bar faults diagnosis
    Bedida, Tarek
    Makhloufi, Salim
    Bekakra, Youcef
    Kermadi, Mostefa
    Bessous, Noureddine
    Kechida, Ridha
    Taibi, Djamel
    [J]. ENERGY REPORTS, 2024, 11 : 4940 - 4956
  • [5] Stator Current Modeling of an Induction Motor for Rotor Faults Diagnosis
    Khodja, Mohammed El Amine
    Boudinar, Ahmed Hamida
    Benouzza, Noureddine
    Bendiabdellah, Azeddine
    [J]. 2016 IEEE INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (PEMC), 2016, : 1091 - 1096
  • [6] Influence of Nonconsecutive Bar Breakages in Motor Current Signature Analysis for the Diagnosis of Rotor Faults in Induction Motors
    Riera-Guasp, Martin
    Fernandez Cabanas, Manes
    Antonino-Daviu, Jose A.
    Pineda-Sanchez, Manuel
    Rojas Garcia, Carlos H.
    [J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2010, 25 (01) : 80 - 89
  • [7] Influence of Rotor Faults on Induction Motor Stator Current Concordia Patterns
    Purkait, P.
    Das, G.
    Mukherjee, D.
    Das, S.
    [J]. 2012 1ST INTERNATIONAL CONFERENCE ON POWER AND ENERGY IN NERIST (ICPEN), 2012,
  • [8] Experimental Investigation of New Indices of Broken Rotor Bar in Induction Motor
    Oumaamar, M. E. K.
    Razik, H.
    Rezzoug, A.
    Chemali, H.
    Khezzar, A.
    [J]. INTERNATIONAL AEGEAN CONFERENCE ON ELECTRICAL MACHINES AND POWER ELECTRONICS & ELECTROMOTION JOINT CONFERENCE, 2011, : 304 - 307
  • [9] Rotor cage faults detection in induction motors by motor current demodulation analysis
    Jaksch, Ivan
    Fuchs, Petr
    [J]. 2007 IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS & DRIVES, 2007, : 72 - +
  • [10] The analysis of induction motor electromagnetic field and shaft revolution oscillations at dynamic rotor faults
    Jaksch, Ivan
    Schreiber, Richard
    Fuchs, Petr
    [J]. 2015 IEEE INTERNATIONAL WORKSHOP OF ELECTRONICS, CONTROL, MEASUREMENT, SIGNALS AND THEIR APPLICATION TO MECHATRONICS (ECMSM), 2015,