Improvement of the Physico-Mechanical Properties and Stability of Waste Polypropylene in the Presence of Wood Flour and (Maleic Anhydride)-Grafted Polypropylene

被引:13
|
作者
Pal, Kaushik [1 ]
Mukherjee, Madhumita [2 ]
Frackowiak, Stanislaw [3 ]
Kozlowski, Marek [3 ]
Das, Chapal K. [4 ]
机构
[1] Gyeongsang Natl Univ, Sch Nano & Adv Mat Engn, Jinju 660701, Gyeongnam, South Korea
[2] Nanyang Technol Univ, Sch Mat Sci & Engn, Singapore 639798, Singapore
[3] Wroclaw Univ Technol, Fac Environm Engn, PL-50370 Wroclaw, Poland
[4] Indian Inst Technol, Ctr Mat Sci, Kharagpur 721302, W Bengal, India
来源
关键词
MECHANICAL-PROPERTIES; THERMAL-DEGRADATION; CDS-FILLER; COMPOSITES; POLYETHYLENE; POLYSTYRENE; ACID;
D O I
10.1002/vnl.21325
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
This paper deals with (maleic anhydride)-grafted polypropylene (MAH-g-PP) and wood flour reinforcement and their effects on the dynamic, mechanical, morphological, and rheological properties of waste polypropylene (PP) composites. MAH-g-PP was used as a compatibilizer to improve the physical interaction between the filler and matrix. The composites were prepared by using a twin-screw extruder followed by injection molding. Thermal stability and mechanical properties of the compatibilized system increased as compared to their values for the uncompatibilized system. Also, nearly 60% and 30% loss was found for mechanical properties and weight loss, respectively, in a biodegradability study. J. VINYL ADDIT. TECHNOL., 20:24-30, 2014. © 2014 Society of Plastics Engineers © 2014 Society of Plastics Engineers.
引用
收藏
页码:24 / 30
页数:7
相关论文
共 50 条
  • [1] Effect of Montmorillonite and Maleic anhydride grafted Polypropylene content on polypropylene/wood flour composites
    Khanjanzadeh, Hossein
    Tabarsa, Taghi
    [J]. MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 596 - 599
  • [2] Effects of Maleic Anhydride Grafted Polypropylene on the Physical, Mechanical and Flammability Properties of Wood-flour/Polypropylene/Ammonium Polyphosphate Composites
    Wang, Wen
    Chen, Hui
    Li, Jianzhang
    [J]. FIBERS AND POLYMERS, 2021, 22 (04) : 1137 - 1144
  • [3] Effects of Maleic Anhydride Grafted Polypropylene on the Physical, Mechanical and Flammability Properties of Wood-flour/Polypropylene/Ammonium Polyphosphate Composites
    Wen Wang
    Hui Chen
    Jianzhang Li
    [J]. Fibers and Polymers, 2021, 22 : 1137 - 1144
  • [4] Effects of Maleic Anhydride-Grafted Polypropylene (MAPP) on the Physico-Mechanical Properties and Rheological Behavior of Bamboo Powder-Polypropylene Foamed Composites
    Zhou, Xiaxing
    Yu, Yan
    Lin, Qiaojia
    Chen, Lihui
    [J]. BIORESOURCES, 2013, 8 (04): : 6263 - 6279
  • [5] EFFECTS OF THE CHARACTERISTICS OF WOOD FLOUR ON THE PHYSICO-MECHANICAL AND THERMAL PROPERTIES OF RECYCLED POLYPROPYLENE
    Lisperguer, Justo
    Bustos, Ximena
    Saravia, Yanina
    Escobar, Carolina
    Venegas, Henry
    [J]. MADERAS-CIENCIA Y TECNOLOGIA, 2013, 15 (03): : 321 - 336
  • [6] Selected Properties of Mahogany Wood Flour Filled Polypropylene Composites: The Effect of Maleic Anhydride-Grafted Polypropylene (MAPP)
    Cavus, Vedat
    [J]. BIORESOURCES, 2020, 15 (02): : 2227 - 2236
  • [7] Physico-mechanical and thermal stability of wood flour/waste polypropylene nanocomposites: impact of flame retardant fillers and gamma irradiation
    Raslan, Heba A.
    Awad, Eman H.
    [J]. POLYMER BULLETIN, 2022, 79 (02) : 1133 - 1149
  • [8] The effect of maleic anhydride grafted polypropylene addition on the degradation in the mechanical properties of the PP/ wood composites
    Baig, Muneer
    Almeshari, Bandar
    Aabid, Abdul
    Junaedi, Harri
    Almajid, Abdulhakim
    [J]. HELIYON, 2024, 10 (09)
  • [9] Effect of maleic anhydride content on physico-mechanical properties of γ-irradiated waste polypropylene/corn husk fibers bio-composites
    EL-Zayat, Mai M.
    Mohamed, Maysa A.
    Shaltout, Nadeen A.
    [J]. RADIOCHIMICA ACTA, 2020, 108 (02) : 151 - 157
  • [10] Electrical and mechanical properties of graphite/maleic anhydride grafted polypropylene nanocomposites
    Roh, Jeong U.
    Ma, Sung Won
    Lee, Woo Il
    Hahn, H. Thomas
    Lee, Dong Woo
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 45 (01) : 1548 - 1553