The Study on Simulation Theory of Solidification Microstructure of Alloy Melt Pool in the Laser Additive Manufacturing Process

被引：0
|
作者：
Zhou, Yue [1 ]
Chen, Suiyuan [1 ]
Guan, Tingting [1 ]
Cui, Tong [1 ]
Liang, Jing [1 ]
Liu, Changsheng [1 ]
机构：
[1] Northeastern Univ, Sch Mat & Engn, Minist Educ, Key Lab Anisotropy & Texture Mat, Shenyang 110819, Liaoning, Peoples R China
来源：
2017 INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND BIOLOGICAL ENGINEERING (ICMSBE 2017) | 2017年
基金：
国家重点研发计划;
关键词：
Laser additive manufacturing; alloy steel; microstructure of melt pool; phase field method; cellular automaton method;
D O I：
暂无
中图分类号：
Q81 [生物工程学（生物技术）]; Q93 [微生物学];
学科分类号：
071005 ; 0836 ; 090102 ; 100705 ;
摘要：
With the development of laser additive manufacturing technology (LAM) and computer technology, it has been widely concerned that the simulation method is used to predict the solidification microstructure of alloy melt pool in the LAM process, because simulation method has advantages of short experimental period, low cost and comprehensiveness. This paper respectively introduces the basic principle of phase field (PF) model and cellular automaton (CA) model, and then illustrates the application of simulating the solidification microstructure of alloy melt pool in the process of LAM. In addition, the results of comparative analysis shows that CA method is more suitable for simulating the microstructure of melt pool than PF method in the LAM process. Finally, the existing problems and future development trends of models and algorithms are put forward, which provides a theoretical reference for the laser additive manufacturing of alloy steel.
引用
收藏
页码：116 / 120
页数：5
相关论文
共 50 条
  • [1] Influence of alloy solidification path on melt pool behavior in additive manufacturing
    Wells, S.
    Plotkowski, A.
    Coleman, J.
    Krane, M. J. M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 229
  • [2] Study of melt pool geometry and solidification microstructure during laser surface melting of Inconel 625 alloy
    Chaurasia, Jitender K.
    Jinoop, A. N.
    Parthasarathy, P.
    Paul, C. P.
    Bindra, K. S.
    Bontha, Srikanth
    OPTIK, 2021, 246
  • [3] Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
    Manvatkar, V.
    De, A.
    DebRoy, T.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (08) : 924 - 930
  • [4] Simulation of solidification microstructure evolution in laser addition manufacturing of multicomponent alloy
    Qi H.
    Zhang Y.
    Feng X.
    Han R.
    Wu D.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (05): : 71 - 77
  • [5] Melt pool geometry and morphology variability for the Inconel 718 alloy in a laser powder bed fusion additive manufacturing process
    Scime, Luke
    Beuth, Jack
    ADDITIVE MANUFACTURING, 2019, 29
  • [6] Feedback Control of Melt Pool Area in Selective Laser Melting Additive Manufacturing Process
    Hussain, Syed Zahid
    Kausar, Zareena
    Koreshi, Zafar Ullah
    Sheikh, Shakil R.
    Rehman, Hafiz Zia Ur
    Yaqoob, Haseeb
    Shah, Muhammad Faizan
    Abdullah, Ahmad
    Sher, Farooq
    PROCESSES, 2021, 9 (09)
  • [7] Melt Pool Temperature Control in Laser Additive Process
    Kulchin Y.N.
    Gribova V.V.
    Timchenko V.A.
    Basakin A.A.
    Nikiforov P.A.
    Yatsko D.S.
    Zhevtun I.G.
    Subbotin E.P.
    Nikitin A.I.
    Bulletin of the Russian Academy of Sciences: Physics, 2022, 86 (Suppl 1) : S108 - S113
  • [8] Quantification of melt pool dynamics and microstructure during simulated additive manufacturing
    Lamb, James
    Ochoa, Ruben
    Eres-Castellanos, Adriana
    Klemm-Toole, Jonah
    Echlin, McLean P.
    Sun, Tao
    Fezzaa, Kamel
    Clarke, Amy
    Pollock, Tresa M.
    Scripta Materialia, 2024, 245
  • [9] Quantification of melt pool dynamics and microstructure during simulated additive manufacturing
    Lamb, James
    Ochoa, Ruben
    Eres-Castellanos, Adriana
    Klemm-Toole, Jonah
    Echlin, McLean P.
    Sun, Tao
    Fezzaa, Kamel
    Clarke, Amy
    Pollock, Tresa M.
    SCRIPTA MATERIALIA, 2024, 245
  • [10] Emergence of rapid solidification microstructure in additive manufacturing of a Magnesium alloy
    Tourret, Damien
    Tavakoli, Rouhollah
    Boccardo, Adrian D.
    Boukellal, Ahmed K.
    Li, Muzi
    Molina-Aldareguia, Jon
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2024, 32 (05)
12345