Numerical modeling and MHD stagnation point flow of ferrofluid (non-Newtonian) with Ohmic heating and viscous dissipation

Ferroliquids are made out of exceptionally tiny nanoscale particles (usually diameter 10 nanometers or less) of hematite, magnetite or some other compound comprising iron and a liquid. This is small enough for thermal agitation to scatter them equally inside a transporter liquid, and for them to contribute to general magnetic response of the liquid. The composition of the typical ferroliquid is about 5% magnetic solids, 10% surfactant and 85% carrier by volume. There are frequent applications of ferrofluids in mechanical and industrial engineering. Ferrofluids have innovative characteristics and their impact in magnetic fields prompts many fascinating applications. Albeit magnetic liquids are already utilized in certain devices they have not yet been abused to any level. It is trusted that this research communication may investigate the analyst to think of considering new uses for this entrancing material. Therefore, modeling is developed for the ferrofluid stagnation flow over a stretched surface with Ohmic heating and dissipation. The Tiwari-Das model is used for mathematical modeling of nanofluid. The nonlinear system of differential equations is first converted into first order and then tackled through the built-in-Shooting method. The impact of the different pertinent flow parameters is discussed on the velocity, temperature, Nusselt number and skin friction coefficient through the various plots and tables.