REDUCTION OF FUGITIVE EMISSIONS FROM BOLTED FLANGED CONNECTIONS BY USING PTFE BLENDED GASKET

被引：0

作者：

Kobayashi, Takashi ^{[1
]}

Sato, Koji ^{[2
]}

Muramatsu, Akira ^{[2
]}

Sawa, Toshiyuki ^{[3
]}

机构：

[1] Numazu Coll, Natl Inst Technol, Shizuoka, Japan

[2] Nippon Valqua Ind Ltd, Nara, Japan

[3] Hiroshima Univ, Koto Ku, Tokyo, Japan

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 2 | 2017年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Gasket is the key element which determines the tightness of bolted flanged connection. PTFE blended gaskets which have recently been developed and come onto the market have a superior sealing performance as well as the chemical and temperature resistances and can contribute to reduce fugitive emissions. This paper deals with the sealing behaviors of the PTFE blended gasket and the tightness of a bolted flanged connection in which the gasket is used. The gasket is mainly composed of PTFE and graphite and has a high tightness and heat resistance up to 300 degree C. The creep characteristic is improved by the graphite filler. In this paper, the estimation method of the tightness of bolted flanged connections based on the sealing behavior of gasket is demonstrated. The estimated results are validated by experiments using a flange connection. It is shown that the leak rate below the tightness class 4 defined in the Room Temperature Tightness Test (ROTT, Pressure Vessel Research Council) can be obtained using the PTFE blended gasket.

引用

页数：7

共 50 条

[1] Study on Effect of Gasket Stress Distribution on Bolted Flanged Connections
Liu, Lin
Zhang, Suolong
FUNCTIONAL MATERIALS AND NANOTECHNOLOGY, 2012, 496 : 239 - 242
[2] FEM STRESS ANALYSIS AND SEALING PERFORMANCE OF BOLTED FLANGED CONNECTIONS USING PTFE BLENDED GASKETS UNDER INTERNAL PRESSURE
Sato, Koji
Muramatsu, Akira
Kobayashi, Takashi
Sawa, Toshiyuki
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 2, 2015,
[3] RESEARCH ON TIGHTNESS PERFORMANCE OF CORRUGATED GASKET BOLTED FLANGED CONNECTIONS SYSTEM
Li, Xiang
Yao, Cheng
Li, Jiepu
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 1B, 2017,
[4] How to control (fugitive) emissions from metallic bolted flange connections
Ter Laak, JA
Keetman, FTJ
1ST INTERNATIONAL CONFERENCE ON PROTECTING THE ENVIRONMENT - IN PROCESS INDUSTRY, 1998, (30): : 203 - 210
[5] Experience with bolted-flanged joints and the selection of gaskets to minimize fugitive emissions
Luxmoore, RJ
16TH INTERNATIONAL CONFERENCE ON FLUID SEALING, 2000, (42): : 183 - 194
[6] Analytical Method of Gasket Stress on Bolted Flanged Connections in Consideration of External Bending Moments and Elements Creep
Liu, Lin
Gu, Boqin
2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL II, 2009, : 750 - 753
[7] FEM STRESS ANALYSIS AND MECHANICAL CHARACTERISTICS OF BOLTED PIPE CONNECTIONS WITH LARGER NOMINAL DIAMETER INSERTING PTFE BLENDED GASKET UNDER INTERNAL PRESSURE
Sato, Koji
Sawa, Toshiyuki
Zheng, Xing
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 2, 2018,
[8] Prediction of Time-Correlated Leakage Rates of Bolted Flanged Connections by Considering the Maximum Gasket Contact Stress
Sun, Z. G.
Gu, B. Q.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (01):
[9] Committee on bolted flanged connections and S/c on gasket testing and elevated temperature joint behavior September 20, 1990
Welding Research Council, Progress Reports, 1990, 45 (11-12):
[10] INITIAL INVESTIGATION ON THE EFFECT OF BOLT LOADING RATE ON THE NEED TO RE-TORQUE PTFE GASKETS IN BOLTED FLANGED CONNECTIONS
Clarke, Mandi M.
Grant, Kenneth R.
Waterland, A. Fitzgerald , III
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 2, 2015,

← 1 2 3 4 5 →