Film cooling from a cylindrical hole with parallel auxiliary holes influences

被引：8
|
作者：
Dai, Sheng-ji [1 ]
Xiao, Yang [1 ]
He, Li-ming [1 ]
Jin, Tao [1 ]
Zhao, Zi-chen [1 ]
机构：
[1] Air Force Engn Univ, Aeronaut & Astronaut Engn Coll, Xian 710038, Peoples R China
来源：
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS | 2016年 / 69卷 / 05期
基金：
中国国家自然科学基金;
关键词：
DENSITY; PERFORMANCE; ROW;
D O I：
10.1080/10407782.2015.1081023
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In the present paper, numerical analysis has been performed to investigate the film-cooling performance of a cylindrical hole, cylindrical hole with upstream parallel auxiliary holes, cylindrical hole with downstream parallel auxiliary holes, and a cylindrical hole with both upstream and downstream parallel auxiliary holes. Four kinds of film-cooling holes are compared through Reynolds-averaged Navier-Stokes (RANS) analysis for four blowing ratios: 0.5, 1.0, 1.5, and 2.0. The result shows that the auxiliary holes enhance the film-cooling effectiveness. The cylindrical hole with upstream auxiliary holes is better for protecting the text surface than the cylindrical hole with downstream auxiliary holes. In general, the hole with both upstream and downstream parallel auxiliary holes shows the most effective film protection compared with the other three cases tested in this work, especially in blow ratios 0.5 and 1.0.
引用
收藏
页码：497 / 511
页数：15
相关论文
共 50 条
  • [1] Influence of the hole length-to-diameter ratio on film cooling with cylindrical holes
    Lutum, E.
    Johnson, B.V.
    Journal of Turbomachinery, 1999, 121 (02): : 209 - 216
  • [2] Influence of the hole length-to-diameter ratio on film cooling with cylindrical holes
    Lutum, E
    Johnson, BV
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1999, 121 (02): : 209 - 216
  • [3] Effects of cylindrical hole accompanied with anti-vortex holes on film cooling effectiveness
    Liu, Xiaohong
    Luo, Xiang
    Tao, Zhi
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2010, 36 (11): : 1271 - 1274
  • [4] Effect of Angle between the Primary and Auxiliary Holes of an Anti-vortex Film Cooling hole
    Moon, Younggi
    Park, Soon Sang
    Park, Jung Shin
    Kwak, Jae Su
    2014 ASIA-PACIFIC INTERNATIONAL SYMPOSIUM ON AEROSPACE TECHNOLOGY, APISAT2014, 2015, 99 : 1492 - 1496
  • [5] FILM COOLING FROM SHORT HOLES WITH SISTER HOLE INFLUENCE
    Ely, Marc J.
    Jubran, B. A.
    PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 4, PTS A AND B, 2012, : 1185 - 1196
  • [6] Influence of Hole Inlet Geometry on the Film Cooling Effectiveness from Shaped Film Cooling Holes
    Watson, Travis B.
    Vinton, Kyle R.
    Wright, Lesley M.
    Crites, Daniel C.
    Morris, Mark C.
    Riahi, Ardeshir
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5B, 2019,
  • [7] Flat surface film cooling from cylindrical holes with discrete tabs
    Nasir, H
    Ekkad, SV
    Acharya, S
    JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2003, 17 (03) : 304 - 312
  • [8] Film cooling measurements for cratered cylindrical inclined holes
    Lu, Yiping
    Dhungel, Alok
    Ekkad, Srinath V.
    Bunker, Ronald S.
    PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 329 - 338
  • [9] Film Cooling Measurements for Cratered Cylindrical Inclined Holes
    Lu, Yiping
    Dhungel, Alok
    Ekkad, Srinath V.
    Bunker, Ronald S.
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2009, 131 (01):
  • [10] Experimental assessment of film cooling from cylindrical holes subject to particulate deposition
    Yang, Xing
    Hao, Zihan
    Feng, Zhenping
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2024, 154
12345