Generality of Brownian motion velocity of two phase approach in interrupted microchannel heat sink

被引:16
|
作者
Tokit, E. Mat [1 ]
Yusoff, M. Z. [2 ]
Mohammed, H. A. [3 ]
机构
[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tenaga Nas, Coll Engn, Dept Mech Engn, Kajang 43000, Selangor, Malaysia
[3] Univ Teknol Malaysia, Fac Mech Engn, Dept Thermofluids, Skudai 81310, Johor Bahru, Malaysia
关键词
Nanofluid; Two phase model; Brownian motion velocity; Microchannel heat sink; LAMINAR MIXED CONVECTION; THERMAL-CONDUCTIVITY; NANOFLUIDS; MODEL; FLOW;
D O I
10.1016/j.icheatmasstransfer.2013.10.005
中图分类号
O414.1 [热力学];
学科分类号
摘要
The thermal performance of a single interrupted microchannel heat sink is analyzed. The generality of Brownian motion velocity had been investigated in the range of various Reynolds numbers of 168 to 1200 and Al2O3 nanofluid volume fractions of 0.01 to 0.04. Three different Brownian motion velocities represent the nanoparticle velocity had been modeled in two-phase modeling of nanofluid system. The heat transfer enhancement in this study is investigated in terms of the predicted Nusselt number. As the Reynolds number increased from 200 to 1200, augmentation in average Nusselt number is predicted from 57.64% to 57.97%. At increasing nanofluid volume fraction from 0.01 to 0.04, conduction dominated the heat transfer process results in Nusselt number increment from 3.90% to 5.13%. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:128 / 135
页数:8
相关论文
共 50 条
  • [1] Investigating the effect of Brownian motion and viscous dissipation on the nanofluid heat transfer in a trapezoidal microchannel heat sink
    Fani, Behzad
    Kalteh, Mohammad
    Abbassi, Abbas
    ADVANCED POWDER TECHNOLOGY, 2015, 26 (01) : 83 - 90
  • [2] Microfiber motion and web formation in a microchannel heat sink: A numerical approach
    Dastan, Alireza
    Abouali, Omid
    COMPUTERS & FLUIDS, 2013, 71 : 28 - 40
  • [3] Two-phase modelling of nanofluid heat transfer in a microchannel heat sink
    Nguyen, C. T.
    Le Menn, M.
    COMPUTATIONAL METHODS AND EXPERIMENTAL MEASUREMENTS XIV, 2009, 48 : 451 - +
  • [4] Two-phase flow instability for boiling in a microchannel heat sink
    Chang, K. H.
    Pan, Chin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (11-12) : 2078 - 2088
  • [5] Analysis of Interrupted Rectangular Microchannel Heat Sink with High Aspect Ratio
    Kamal, H.
    Dewan, A.
    JOURNAL OF APPLIED FLUID MECHANICS, 2017, 10 (01) : 117 - 126
  • [6] Parameter study of laminar flow and heat transfer in an interrupted microchannel heat sink with ribs
    Wang W.
    Shuai Y.
    Su W.
    Li B.
    Tan Y.
    Sundén B.
    Heat Transfer Research, 2021, 52 (02): : 13 - 27
  • [7] PARAMETER STUDY OF LAMINAR FLOW AND HEAT TRANSFER IN AN INTERRUPTED MICROCHANNEL HEAT SINK WITH RIBS
    Wang, Wei
    Shuai, Yong
    Su, Wentao
    Li, Bingxi
    Tan, Yufei
    Sunden, Bengt
    HEAT TRANSFER RESEARCH, 2021, 52 (02) : 13 - 27
  • [8] TWO-PHASE ANALYSIS OF A HELICAL MICROCHANNEL HEAT SINK USING NANOFLUIDS
    Narrein, K.
    Sivasankaran, S.
    Ganesan, P.
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2015, 68 (11) : 1266 - 1279
  • [9] The Effect of Parameter Changes to the Performance of a Triangular Shape Interrupted Microchannel Heat Sink
    Abd Munir, Fudhail
    Azmi, Mohd Irwan Mohd
    Razali, Nadlene
    Tokit, Ernie Mat
    JURNAL TEKNOLOGI, 2012, 58
  • [10] Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids
    Tokit, E. Mat
    Mohammed, H. A.
    Yusoff, M. Z.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (10) : 1595 - 1604