Heave compensation system of lifting pipeline for deep-sea mining based on combined action of vibration absorber and accumulator

被引:3
|
作者
Yang Hengling [1 ,2 ,3 ]
Liu Shaojun [1 ,2 ,3 ]
机构
[1] Cent S Univ, Coll Mech & Elect Engn, Changsha 410083, Hunan, Peoples R China
[2] Cent S Univ, Shenzhen Res Inst, Shenzhen, Peoples R China
[3] State Key Lab Deep Sea Mineral Res Dev & Utilizat, Changsha, Hunan, Peoples R China
关键词
Accumulator; deep-sea mining; heave compensation; vibration absorber; SHIP;
D O I
10.1080/1064119X.2018.1445147
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
A heave compensation system combined with a vibration absorber and accumulator is proposed, with regard to the requirement for poly-metallic nodule mining systems at an ocean depth of 6,000 m in China. The principle of the compensation system was analyzed, its main parameters were designed, and its mathematical model was established. The system performance was simulated and analyzed in MATLAB, and the frequency domain characteristics and compensation rate of the system with different volume accumulators, and with or without vibration absorbers, were compared. A simulation test of the compensation system was conducted. The proposed compensation system had a better compensation effect for a random wave interference under level-6 sea conditions, and the compensation rate being more than 72% with optimal system parameters.
引用
收藏
页码:393 / 401
页数:9
相关论文
共 26 条
  • [1] Parameter Design of Heave Compensation System of Deep-sea Mining based on Dynamic Vibration Absorber and its Experimental Study
    Li, Liujun
    Liu, Shaojun
    Zuo, Jinyu
    MECHANICAL ENGINEERING AND GREEN MANUFACTURING, PTS 1 AND 2, 2010, : 1999 - 2005
  • [2] Modeling and Simulation of Active-Controlled Heave Compensation System of Deep-sea Mining based on Dynamic Vibration Absorber
    Li, Liujun
    Liu, Shaojun
    2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS, 2009, : 1337 - 1341
  • [3] On heave compensation system for deep-sea mining equipment
    Xiao, Tibing
    Zhou, Yuming
    Wu, Baihai
    Dai, Jianhong
    PROCEEDINGS OF THE SEVENTH INTERNATIONAL CONFERENCE ON FLUID POWER TRANSMISSION AND CONTROL, 2009, : 127 - 130
  • [4] Linkage characteristics of deep-sea mining lifting system
    Chen, Wei
    Xu, Hai-Liang
    Peng, Neng
    Yang, Fang-qiong
    Lin, Peng
    OCEAN ENGINEERING, 2021, 233
  • [5] The Simulation Research on Passive Heave Compensation System for Deep Sea Mining
    Ni, Jia
    Liu, Shaojun
    Wang, Mingfeng
    Hu, Xiaozhou
    Dai, Yu
    2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS, 2009, : 5111 - 5116
  • [6] Virtual prototype modeling and fuzzy control of the heave compensation system for a 500-ton deep-sea mining vessel
    Teng, Yuanyuan
    Hu, Zhouguo
    Sun, Yougang
    TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2024,
  • [7] Research on the pump-vessel combined ore lifting equipment for deep-sea rigid pipe mining system
    Xu Hailiang
    JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 2008, 130 (01):
  • [8] Analysis of vibration characteristics of lifting rigid pipe in deep-sea mining under ship movement
    Huang, Bin
    Chen, Jiacheng
    Liu, Chang
    Wang, Lu
    Wang, Pengzhong
    MARINE GEORESOURCES & GEOTECHNOLOGY, 2024,
  • [9] Longitudinal vibration compensation model of stepped-pipe strings in deep-sea mining
    Song, QingHui
    Jiang, HaiYan
    Song, QingJun
    Xiao, Linjing
    Liu, Qiang
    PLOS ONE, 2020, 15 (11):
  • [10] Scale model test of a semi-active heave compensation system for deep-sea tethered ROVs
    Quan, Weicai
    Liu, Yinshui
    Zhang, Zhuying
    Li, Xiaohui
    Liu, Chengqiang
    OCEAN ENGINEERING, 2016, 126 : 353 - 363