Effect of cross-flow velocity on flow and heat transfer characteristics of impinging jet with low jet-to-plate distance

被引：24

作者：

Wae-hayee, Makatar ^{[1
]}

Tekasakul, Perapong ^{[1
]}

Eiamsa-ard, Smith

Nuntadusit, Chayut ^{[1
]}

机构：

[1] Prince Songkla Univ, Dept Mech Engn, Fac Engn, Hat Yai 90112, Songkhla, Thailand

来源：

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2014年 / 28卷 / 07期

关键词：

Cross-flow; Heat transfer characteristics; Impinging jet; Numerical simulation; Thermochromic liquid crystal; IN-LINE ARRAYS; LIQUID-CRYSTAL TECHNIQUE; AIR-JETS; STAGGERED ARRAYS; NOZZLE GEOMETRY; CIRCULAR JETS; SPENT AIR; IMPINGEMENT; SURFACE; PITCH;

D O I：

10.1007/s12206-014-0534-3

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An effect of cross-flow velocity on flow and heat transfer characteristics of impinging jet in the case of low jet-to-plate distance at H = 2D was experimentally and numerically investigated. In the experiments, the air jet from orifice impingement on the wall of wind tunnel while a cross-flow was simultaneously induced normal to the jet flow. The jet velocity was fixed while the cross-flow velocity was varied corresponding to velocity ratios (jet velocity/cross-flow velocity) VR = 3, 5 and 7. The temperature distribution on an impinged surface was visualized by using thermochromic liquid crystal sheet (TLCs), and Nusselt number distribution was evaluated by using image processing method. The flow pattern on impingement surface was visualized by using oil film technique. The numerical simulation was carried out for a better understanding of the jet flow in the cross-flow. The results show that Nusselt number peak shifts downstream and the Nusselt number peak increases with increasing cross-flow velocity.

引用

页码：2909 / 2917

页数：9

共 50 条

[1] Effect of cross-flow velocity on flow and heat transfer characteristics of impinging jet with low jet-to-plate distance
Makatar Wae-hayee
Perapong Tekasakul
Smith Eiamsa-ard
Chayut Nuntadusit
[J]. Journal of Mechanical Science and Technology, 2014, 28 : 2909 - 2917
[2] Flow and Heat Transfer Characteristics of in-Line Impinging Jets With Cross-Flow At Short Jet-To-Plate Distance
Wae-Hayee, M.
Tekasakul, P.
Eiamsa-ard, S.
Nuntadusit, C.
[J]. EXPERIMENTAL HEAT TRANSFER, 2015, 28 (06) : 511 - 530
[3] HEAT-TRANSFER CHARACTERISTICS OF AN IMPINGING JET IN A CROSS-FLOW
HOLLWORTH, BR
BOWLEY, WW
[J]. MECHANICAL ENGINEERING, 1976, 98 (06): : 116 - 116
[4] Jet-to-Plate Distance Effect on Heat Transfer From a Flat Plate to an Impinging Jet at Various Reynolds Numbers
Streufert, Patricia
Yan, Terry X.
Baygloo, Mandi G.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 7, PTS A-D, 2013, : 2201 - 2209
[5] Investigation of flow and heat transfer of an impinging jet in a cross-flow for cooling of a heated cube
Rundström, D
Moshfegh, B
[J]. ITHERM 2004, VOL 1, 2004, : 455 - 462
[6] Investigation of flow and heat transfer of an impinging jet in a cross-flow for cooling of a heated cube
Rundstrom, D.
Moshfegh, B.
[J]. JOURNAL OF ELECTRONIC PACKAGING, 2006, 128 (02) : 150 - 156
[7] JET-IMPINGEMENT HEAT-TRANSFER FOR A CIRCULAR JET IMPINGING IN CROSS-FLOW ON A CYLINDER
SPARROW, EM
ALTEMANI, CAC
CHABOKI, A
[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1984, 106 (03): : 570 - 577
[8] Flow and heat transfer characteristics of a pulsed jet impinging on a flat plate
Hsu, C. M.
Jhan, W. C.
Chang, Y. Y.
[J]. HEAT AND MASS TRANSFER, 2020, 56 (01) : 143 - 160
[9] Flow and heat transfer characteristics of a pulsed jet impinging on a flat plate
C. M. Hsu
W. C. Jhan
Y. Y. Chang
[J]. Heat and Mass Transfer, 2020, 56 : 143 - 160
[10] Effect of jet-mainstream velocity ratio on flow characteristics and heat transfer enhancement of jet on flat plate flow
Puzu, N.
Prasertsan, S.
Nuntadusit, C.
[J]. 2ND INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS IN RESEARCH AND INDUSTRY (CFDRI 2017), 2017, 243

← 1 2 3 4 5 →