Evaluation of the Coulomb friction coefficient by the Erichsen Test

被引：2
|
作者：
Giuliano, G. [1 ]
机构：
[1] Univ Cassino, DICeM, I-4303043 Cassino, FR, Italy
来源：
MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2 | 2013年 / 365-366卷
关键词：
Erichsen test; Sheet metal forming; Finite Element Method; Friction coefficient; PLANE-STRAIN; COMPRESSION; PARAMETERS;
D O I：
10.4028/www.scientific.net/AMM.365-366.1190
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the Erichsen test is used to identify the friction coefficient of the Coulomb friction model coupling experimental tests results with numerical ones. The evaluation of the Coulomb friction coefficient is based on the distance measured between the thinnest area of the specimen and the lateral surface of the blankholder. Two types of aluminium alloys, AA 2017 Al-Cu alloy and AA 5083 Al-Mg alloy, with thickness of 1.0 mm are selected as the experimental materials for Erichsen test. Specimens are tested in unlubricated condition as well as using two different lubricants, namely Grease LB4 and Mexmoly.
引用
收藏
页码：1190 / 1193
页数：4
相关论文
共 50 条
  • [1] Evaluation of the friction coefficient from the dynamometer test of the aircraft
    Woo, GA
    Jeon, JW
    Lee, KC
    Kim, YJ
    [J]. ON THE CONVERGENCE OF BIO-INFORMATION-, ENVIRONMENTAL-, ENERGY-, SPACE- AND NANO-TECHNOLOGIES, PTS 1 AND 2, 2005, 277-279 : 757 - 764
  • [2] Evaluation of the Coulomb Friction Coefficient in DC05 Sheet Metal Forming
    Giuliano, Gillo
    [J]. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2015, 61 (12): : 709 - 713
  • [3] DISCUSSION - AN INVESTIGATION OF ERICHSEN TEST
    FUKUI, S
    [J]. JOURNAL OF THE INSTITUTE OF METALS, 1965, 93 : 323 - &
  • [4] Effect of lubrication on the Erichsen Test
    Giuliano, G.
    Samani, F.
    [J]. MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2, 2013, 365-366 : 425 - 428
  • [5] Extended evaluation of Erichsen cupping test results by means of laser speckle
    A. Kocańda
    C. Jasiński
    [J]. Archives of Civil and Mechanical Engineering, 2016, 16 : 211 - 216
  • [6] Using the simple compression test to determine Young's modulus, Poisson's ratio and the Coulomb friction coefficient
    Williams, J. G.
    Gamonpilas, C.
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2008, 45 (16) : 4448 - 4459
  • [7] Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test
    Graciani, E.
    Varna, J.
    Mantic, V.
    Blazquez, A.
    Paris, F.
    [J]. 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
  • [8] SHAPE OPTIMIZATION IN CONTACT PROBLEMS WITH COULOMB FRICTION AND A SOLUTION-DEPENDENT FRICTION COEFFICIENT
    Beremlijski, P.
    Haslinger, J.
    Outrata, J. V.
    Patho, R.
    [J]. SIAM JOURNAL ON CONTROL AND OPTIMIZATION, 2014, 52 (05) : 3371 - 3400
  • [9] Extended evaluation of Erichsen cupping test results by means of laser speckle
    Kocanda, A.
    Jasinski, C.
    [J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2016, 16 (02) : 211 - 216
  • [10] Evaluation of the friction coefficient in tube hydroforming with the "corner filling test" in a square section die
    Abdelkefi, Abir
    Malecot, Pierrick
    Boudeau, Nathalie
    Guermazi, Noamen
    Haddar, Nader
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (5-8): : 2265 - 2273
12345