Gas distributors for circulating fluidized bed combustors

被引：0
|
作者：
Hartge, EU [1 ]
Werther, J [1 ]
机构：
[1] Tech Univ Hamburg Harburg, D-21071 Hamburg, Germany
来源：
FLUIDIZATION IX | 1998年
关键词：
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A high-speed video system has been used to study the flow in the vicinity and inside half-cut models of gas distributor nozzles as they are used in circulating fluidized bed combustors. From these measurements mechanisms for erosion and for the backflow of solids could be deduced. Nozzles with a bubble cap type design with a duct where gas is flowing downwards to the gas outlet and with low exit gas velocities seem to be necessary to avoid solids backflow and erosion.
引用
收藏
页码：213 / 220
页数：8
相关论文
共 50 条
  • [1] Hydrodynamic behavior of an internally circulating fluidized bed with tubular gas distributors
    Wenli Zhao
    Tiefeng Wang
    Chenjing Wang
    Zuoliang Sha
    [J]. Particuology, 2013, 11 (06) : 664 - 672
  • [2] Hydrodynamic behavior of an internally circulating fluidized bed with tubular gas distributors
    Zhao, Wenli
    Wang, Tiefeng
    Wang, Chenjing
    Sha, Zuoliang
    [J]. PARTICUOLOGY, 2013, 11 (06) : 664 - 672
  • [3] Ash management in circulating fluidized bed combustors
    Redemann, K.
    Hartge, E. -U.
    Werther, J.
    [J]. FUEL, 2008, 87 (17-18) : 3669 - 3680
  • [4] FLUIDIZED-BED GAS DISTRIBUTORS
    QURESHI, AE
    CREASY, DE
    [J]. POWDER TECHNOLOGY, 1979, 22 (01) : 113 - 119
  • [5] Convective Heat Transfer in Combustors with a Circulating Fluidized Bed
    Yu. V. Polezhaev
    M. V. Protasov
    E. M. Seliverstov
    G. A. Ryabov
    [J]. High Temperature, 2002, 40 : 286 - 294
  • [6] Modelling of sulfur retention in circulating fluidized bed combustors
    Adanez, J
    deDiego, LF
    Gayan, P
    Armesto, L
    Cabanillas, A
    [J]. FUEL, 1996, 75 (03) : 262 - 270
  • [7] EROSIVITY OF PARTICLES IN CIRCULATING FLUIDIZED-BED COMBUSTORS
    WANG, BQ
    GENG, GQ
    LEVY, AV
    MACK, W
    [J]. WEAR, 1992, 152 (02) : 201 - 222
  • [8] DESIGN CONSIDERATIONS FOR CIRCULATING FLUIDIZED-BED COMBUSTORS
    BASU, P
    [J]. JOURNAL OF THE INSTITUTE OF ENERGY, 1986, 59 (441): : 179 - 183
  • [9] Modeling sulfur retention in circulating fluidized bed combustors
    [J]. 1600, Pergamon Press Inc, Tarrytown, NY, USA (50):
  • [10] Radiation heat transfer in circulating fluidized bed combustors
    Eriksson, M
    Golriz, MR
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2005, 44 (04) : 399 - 409
12345