Comparison of polyelectrolyte multilayers built up with polydiallyldimethylammonium chloride and poly(ethyleneimine) from salt-free solutions by in-situ surface plasmon resonance measurements

Polyelectrolytes offer a widespread potential for the defined modification of planar inorganic or polymer surfaces. Essential parameters for the regular adsorption of subsequent polymer layers by electrostatic interactions are the charge of polyelectrolyte and of the outermost surface region, the surface of the substrate, and the molar mass of the polyelectrolyte. To study such effects in mono- and multilayers we used poly(diallyldimethylammonium chloride (PD) with a molar mass from 5000 to 400000 g/mol as a strong polycation and poly(ethyleneimine) (PEI) with 75000 g/mol as a weak polycation and poly(sodium styrenesulfonate) (PSS) from 70000 to 1 Mio g/mol in the diluted and semi-diluted region. The characterization of the layers was performed by streaming potential, in-situ SPR and UV-Vis spectroscopy. Thereby the layer built up at the solid/liquid-interface could be followed and quantified at the molecular level. SPR revealed that the thicknesses of the multilayer depends strongly on pK values of the polyelectrolyte (strong or weak) and the molar masses. We observed a linear growth if both polyelectrolytes are strong and an exponential growth if one polyelectrolyte is weak. The thickness increased with higher molar masses of the polyelectrolytes. The process was followed in-situ in short time steps.