Preparation and corrosion properties of Ni-based amorphous alloy coating

被引：0

作者：

Wang Aiping ^{[1
]}

Chang Xinchun ^{[1
]}

Hou Wanliang ^{[1
]}

Wang Jianqiang ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China

来源：

ACTA METALLURGICA SINICA | 2006年 / 42卷 / 05期

关键词：

Ni-based amorphous alloy coating; kinetic metallization; corrosion resistance;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A Ni53Nb20Ti10Zr8Co6Cu3 fully amorphous metallic coating with thickness of about 500 Am was prepared by kinetic metallization (KM) spraying gas-atomized powders. It was indicated that the porosities in the deposited coatings decreased with increasing spray temperature and deposition efficiency. The corrosion property of the coatings was evaluated by potentiodynamic polarization in 1 kmol/m(3) HCl aqueous solution. The coating holds a good corrosion resistance at a lower porosity, which is comparable with that of the corresponding amorphous alloy.

引用

页码：537 / 539

页数：3

共 8 条

[1] A study on the quantitative determination of through-coating porosity in PVD-grown coatings
Ahn, SH
Lee, JH
Kim, HG
Kim, JG
[J]. APPLIED SURFACE SCIENCE, 2004, 233 (1-4) : 105 - 114
[2] In situ formed (CU0.6Zr0.25Ti0.15)93Nb7 bulk metallic glass composites
Bian, Z
Ahmad, J
Zhang, W
Inoue, A
[J]. MATERIALS TRANSACTIONS, 2004, 45 (07) : 2346 - 2350
[3] Microstructural characterisation of a Ni-Cr-B-C based alloy coating produced by high velocity oxy-fuel thermal spraying
Dent, AH
Horlock, AJ
McCartney, DG
Harris, SJ
[J]. SURFACE & COATINGS TECHNOLOGY, 2001, 139 (2-3): : 244 - 250
[4] Gabel H, 2004, ADV MATER PROCESS, V162, P47
[5] Evaluation of through-porosity of HVOF sprayed coating
Kawakita, J
Kuroda, S
Kodama, T
[J]. SURFACE & COATINGS TECHNOLOGY, 2003, 166 (01): : 17 - 23
[6] Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite
Szuecs, F
Kim, CP
Johnson, WL
[J]. ACTA MATERIALIA, 2001, 49 (09) : 1507 - 1513
[7] Formation and properties of Ni-based amorphous metallic coating produced by HVAF thermal spraying
Wang, AP
Zhang, T
Wang, HQ
[J]. MATERIALS TRANSACTIONS, 2005, 46 (05) : 1010 - 1015
[8] New bulk glassy Ni-based alloys with high strength of 3000 MPa
Zhang, T
Inoue, A
[J]. MATERIALS TRANSACTIONS, 2002, 43 (04) : 708 - 711

← 1 →