Finite Element Simulation of PCD Tool Cutting Titanium Alloy

被引：0
|
作者：
Liu, Xianli [1 ]
Zhang, Jiayi [1 ]
Wang, Yu [1 ]
Yue, Caixu [1 ]
Liu, Fei [1 ]
机构：
[1] Harbin Univ Sci & Technol, Harbin 150080, Heilongjiang, Peoples R China
来源：
ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII | 2014年 / 589-590卷
关键词：
PCD tool; Ti6Al4V; FEM; Cutting temperature; Cutting force;
D O I：
10.4028/www.scientific.net/KEM.589-590.64
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Titanium alloy is widely applied in various fields, but it's a sort of difficult-to-cut material. In this paper, DEFORM-3D is used to carry on a simulation of PCD tool milling Ti6Al4V. Variation curves of cutting temperature and cutting force are obtained by changing cutting speed, feed per tooth and axial cutting depth. Further, the effect of cutting parameters on cutting temperature and cutting force is revealed. The research shows that cutting temperature and cutting force increase with cutting parameters. In addition, single factor experiments are conducted to verify that the results of the experiments are in consistent with those of the simulation, and that the simulation model is correct. The results will provide new methods for studies of cutting temperature and cutting force of PCD tool milling Ti6Al4V.
引用
收藏
页码：64 / 69
页数：6
相关论文
共 50 条
  • [1] Mechanics Model and Finite Element Simulation of High Speed Orthogonal Cutting of Titanium Alloy
    Yang, Yong
    Wang, Yuling
    Li, Changhe
    [J]. MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 1101 - 1104
  • [2] High Speed Cutting of Titanium Alloy with PCD Tools
    Ota, Michiko
    Okida, Junya
    Harada, Takashi
    Toda, Naohiro
    Sumiya, Hitoshi
    [J]. ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 157 - 162
  • [3] Development of novel cutting tool with a micro-hole pattern on PCD insert in machining of titanium alloy
    Rao, Charitha M.
    Rao, Shrikantha S.
    Herbert, Mervin A.
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 : 93 - 103
  • [4] The Influence of Cutting Speed on Cutting Temperatures and Forces in Fine Turning of VT1-0 Titanium Alloy by a PCD Tool
    Devin, L. N.
    Stakhniv, N. E.
    Antoniuk, A. S.
    Rychev, S. V.
    Nechiporenko, V. N.
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2019, 41 (02) : 119 - 125
  • [5] The Influence of Cutting Speed on Cutting Temperatures and Forces in Fine Turning of VT1-0 Titanium Alloy by a PCD Tool
    L. N. Devin
    N. E. Stakhniv
    A. S. Antoniuk
    S. V. Rychev
    V. N. Nechiporenko
    [J]. Journal of Superhard Materials, 2019, 41 : 119 - 125
  • [6] PREDICTING THE HIGH SPEED CUTTING PROCESS OF TITANIUM ALLOY BY FINITE ELEMENT METHOD
    Zhang, Xiangqin
    Zhang, Xueping
    Srivastava, A. K.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 1, 2011, : 215 - +
  • [7] Influence of different cutting edges caused by tool wear on cutting process of titanium alloy TC21 based on finite element model
    Zhu, Xiaoling
    Cai, Li
    Qian, Xiaohua
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (1-2) : 229 - 239
  • [8] Finite Element Modeling and Simulation of High-Speed Cutting for Titanium Alloy Considering Macro and Micro Physical Characters
    Yang, Yong
    Guo, Yuwen
    Wang, Fengyu
    [J]. INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND MECHANICAL MANUFACTURING ENGINEERING (MPMME 2015), 2015, : 165 - 169
  • [9] 3-D Finite Element Simulation Analysis of Milling Titanium Alloy Using Different Cutting Edge Radius
    Sui Xiulin
    Zhang Shiguang
    Guan Yang
    Chen Bin
    [J]. PROCEEDINGS 2015 SIXTH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS DESIGN AND ENGINEERING APPLICATIONS ISDEA 2015, 2015, : 1 - 4
  • [10] The Design and Finite Element Simulation Analysis of the Tool in Milling Titanium Alloys
    Zhu, Caili
    Huang, Shutao
    Zhou, Li
    [J]. ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 373 - +
12345