Heat Transfer Modeling in the Context of Large Eddy Simulation of Premixed Combustion with Tabulated Chemistry

Tabulated chemistry models like the Flamelet Generated Manifolds method are a good approach to include detailed information on the reaction kinetics in a turbulent flame at reasonable computational costs. However, so far, not all information on e.g. heat losses are contained in these models. As those often appear in typical technical applications with enclosed flames in combustion chambers, extensions to the standard FGM approach will be presented in this paper, allowing for the representation of non-adiabatic boundaries. The enthalpy as additional control variable for the table access is introduced, such that the chemistry database becomes three-dimensional with mixture fraction, reaction progress variable and enthalpy describing the thermo-chemical state. The model presented here is first validated with a two-dimensional enclosed Bunsen flame and then applied within the Large Eddy Simulations of a turbulent premixed swirl flame with a water-cooled bluff body and a turbulent stratified flame, where additional modeling for the flame structure using artificially thickened flames was included. The results are encouraging, as the temperature decrease towards the bluff body in the swirl flame and the cooling of the pilot flame exhaust gases in the stratified configuration can be observed in both experiments and simulation.