First results from the 10Be marker experiment in JET with ITER-like wall

被引：5

作者：

Bergsaker, H. ^{[1
]}

Possnert, G. ^{[2
]}

Bykov, I. ^{[1
]}

Heinola, K. ^{[3
]}

Petersson, P. ^{[1
]}

Miettunen, J. ^{[4
]}

Widdowson, A. ^{[7
]}

Riccardo, V. ^{[7
]}

Nunes, I. ^{[7
]}

Stamp, M. ^{[7
]}

Brezinsek, S.

Groth, M. ^{[4
]}

Kurki-Suonio, T. ^{[4
]}

Likonen, J. ^{[5
]}

Coad, J. P. ^{[5
]}

Borodin, D. ^{[8
]}

Kirschner, A. ^{[8
]}

Schmid, K. ^{[6
]}

Krieger, K. ^{[6
]}

机构：

[1] Royal Inst Technol KTH, Assoc EURATOM VR, Div Fus Plasma Phys, Stockholm, Sweden

[2] Uppsala Univ, Assoc EURATOM VR, Tandem Lab, S-75105 Uppsala, Sweden

[3] Univ Helsinki, Dept Phys, Assoc EURATOM TEKES, Helsinki 00560, Finland

[4] Aalto Univ, Assoc EURATOM TEKES, Aalto 00076, Finland

[5] VTT, Assoc EURATOM TEKES, Espoo 02044, Finland

[6] Max Planck Inst Phys & Astrophys, EURATOM Assoc, D-85748 Garching, Germany

[7] Culham Sci Ctr, EURATOM CCFE Fus Assoc, Abingdon OX14 3DB, Oxon, England

[8] Forschungszentrum Julich, IEF Plasmaphys, TEC, Assoc EURATOM FZJ, D-52425 Julich, Germany

来源：

NUCLEAR FUSION | 2014年 / 54卷 / 08期

基金：

英国工程与自然科学研究理事会;

关键词：

materials; erosion; tokamaks; migration;

D O I：

10.1088/0029-5515/54/8/082004

中图分类号：

O35 [流体力学]; O53 [等离子体物理学];

学科分类号：

070204 ; 080103 ; 080704 ;

摘要：

When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with Be-10 as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of Be-10 concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.

引用

页数：4

共 50 条

[1] The JET ITER-like wall experiment: First results and lessons for ITER
Horton, Lorne
FUSION ENGINEERING AND DESIGN, 2013, 88 (6-8) : 434 - 439
[2] Materials migration in JET with ITER-like wall traced with a 10Be isotopic marker
Bykov, I.
Bergsaker, H.
Possnert, G.
Heinola, K.
Miettunen, J.
Groth, M.
Petersson, P.
Widdowson, A.
Likonen, J.
JOURNAL OF NUCLEAR MATERIALS, 2015, 463 : 773 - 776
[3] Predictive ASCOT modelling of 10Be transport in JET with the ITER-like wall
Miettunen, J.
Groth, M.
Kurki-Suonio, T.
Bergsaker, H.
Likonen, J.
Marsen, S.
Silva, C.
Akaslompolo, S.
JOURNAL OF NUCLEAR MATERIALS, 2013, 438 : S612 - S615
[4] Overview of the JET results with the ITER-like wall
Romanelli, F.
Abel, I.
Afanesyev, V.
Aftanas, M.
Agarici, G.
Aggarwal, K. M.
Aho-Mantila, L.
Ahonen, E.
Aints, M.
Airila, M.
Akers, R.
Alarcon, Th.
Albanese, R.
Alexeev, A.
Alfier, A.
Allan, P.
Almaviva, S.
Alonso, A.
Alper, B.
Altmann, H.
Alves, D.
Ambrosino, G.
Amosov, V.
Andersson, F.
Sunden, E. Andersson
Andreev, V.
Andrew, Y.
Angelone, M.
Anghel, M.
Anghel, A.
Angioni, C.
Apruzzese, G.
Arcis, N.
Arena, P.
Argouarch, A.
Ariola, M.
Armitano, A.
Arnoux, G.
Arshad, S.
Artaserse, G.
Artaud, J. F.
Ash, A.
Asp, E.
Asunta, O.
Atanasiu, C. V.
Atkins, G.
Avotina, L.
Axton, M. D.
Ayres, C.
Baciero, A.
NUCLEAR FUSION, 2013, 53 (10)
[5] An ITER-like wall for JET
Pamela, J.
Matthews, G. F.
Philipps, V.
Kamendje, R.
JOURNAL OF NUCLEAR MATERIALS, 2007, 363 (1-3) : 1 - 11
[6] Wall conditioning of JET with the ITER-Like Wall
Douai, D.
Brezinsek, S.
Esser, H. G.
Joffrin, E.
Keenan, T.
Knipe, S.
Kogut, D.
Lomas, P. J.
Marsen, S.
Nunes, I.
Philipps, V.
Pitts, R. A.
Shimada, M.
de Vries, P.
JOURNAL OF NUCLEAR MATERIALS, 2013, 438 : S1172 - S1176
[7] First scenario development with the JET new ITER-like wall
Joffrin, E.
Baruzzo, M.
Beurskens, M.
Bourdelle, C.
Brezinsek, S.
Bucalossi, J.
Buratti, P.
Calabro, G.
Challis, C. D.
Clever, M.
Coenen, J.
Delabie, E.
Dux, R.
Lomas, P.
de la Luna, E.
de Vries, P.
Flanagan, J.
Frassinetti, L.
Frigione, D.
Giroud, C.
Groth, M.
Hawkes, N.
Hobirk, J.
Lehnen, M.
Maddison, G.
Mailloux, J.
Maggi, C. F.
Matthews, G.
Mayoral, M.
Meigs, A.
Neu, R.
Nunes, I.
Puetterich, T.
Rimini, F.
Sertoli, M.
Sieglin, B.
Sips, A. C. C.
van Rooij, G.
Voitsekhovitch, I.
NUCLEAR FUSION, 2014, 54 (01)
[8] Operation of JET with an ITER-like Wall
Horton, Lorne
FUSION ENGINEERING AND DESIGN, 2015, 96-97 : 28 - 33
[9] Power handling of the JET ITER-like wall
Arnoux, G.
Balboa, I.
Clever, M.
Devaux, S.
De Vries, P.
Eich, T.
Firdaouss, M.
Jachmich, S.
Lehnen, M.
Lomas, P. J.
Matthews, G. F.
Mertens, Ph
Nunes, I.
Riccardo, V.
Ruset, C.
Sieglin, B.
Valcarcel, D. F.
Wilson, J.
Zastrow, K-D
PHYSICA SCRIPTA, 2014, T159
[10] Overview of the JET ITER-like Wall Project
Philipps, V.
Mertens, Ph.
Matthews, G. F.
Maier, H.
FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) : 1581 - 1586

← 1 2 3 4 5 →