Probability of failure on demand in IEC 61508

被引：0
|
作者：
Shimodaira, T [1 ]
Takeda, I [1 ]
Suyama, K [1 ]
Sato, Y [1 ]
机构：
[1] Tokyo Univ Marine Sci & Technol, Koto Ku, Tokyo 1358533, Japan
来源：
PROBABILISTIC SAFETY ASSESSMENT AND MANAGEMENT, VOL 1- 6 | 2004年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new and explicit approach for estimation of average Probability of Failure to perform its design function on Demand (PFD), based on the expectations of fault duration/repair time in accordance with IEC 61508. From a practical viewpoint, the formula for estimation of PFD of the negligible Mean Time To Repair (MTTR) configuration Safety-Related System (SRS) operated in low and short duration demand mode is feasible for the non-negligible MTTR configuration SRS with no self-diagnostic function.
引用
收藏
页码：2404 / 2409
页数：6
相关论文
共 50 条
  • [1] IEC 61508: Effect of Test Policy on the Probability of Failure on Demand of Safety Instrumented Systems
    Contini, Sergio
    Copelli, Sabrina
    Raboni, Massimo
    Torretta, Vincenzo
    Cattaneo, Carlo Sala
    Rota, Renato
    2013 PROGNOSTICS AND HEALTH MANAGEMENT CONFERENCE (PHM), 2013, 33 : 487 - 492
  • [2] Consideration of the non-continuous process for IEC 61508 and EN 50129 for the calculation of probability of failure of a safety function
    Prostrednik, Daniel
    Geyer, Hermann
    AUTOMATION 2009, 2009, 2067 : 375 - 378
  • [3] Safety Achieved by the Safe Failure Fraction (SFF) in IEC 61508
    Yoshimura, Itaru
    Sato, Yoshinobu
    IEEE TRANSACTIONS ON RELIABILITY, 2008, 57 (04) : 662 - 669
  • [4] IEC 61508 Systematic Capability
    Creech, Gerry
    MEASUREMENT & CONTROL, 2014, 47 (04): : 125 - 128
  • [5] IEC 61508 - Pain or gain?
    Timms, Clive
    Measurement and Control, 2002, 35 (06) : 173 - 175
  • [6] IEC 61508 - Pain or Gain?
    Timms, C
    MEASUREMENT & CONTROL, 2002, 35 (06): : 173 - 175
  • [7] Final elements in IEC 61508
    Cnossen, J
    COMPLIANCE, SAFETY AND ENVIRONMENTAL ADVANCES, 1999, 394 : 163 - 166
  • [8] Introduction and Revision of IEC 61508
    Bell, Ron
    ADVANCES IN SYSTEMS SAFETY, 2011, : 273 - 291
  • [9] Apply IEC 61508 correctly
    不详
    ATP EDITION, 2012, (12): : 12 - 12
  • [10] Updating failure rates and test intervals in the operational phase: A practical implementation of IEC 61511 and IEC 61508
    Hauge, S.
    Lundteigen, M. A.
    Rausand, M.
    RELIABILITY, RISK AND SAFETY: THEORY AND APPLICATIONS VOLS 1-3, 2010, : 1715 - 1722
12345