Optimization of process parameters of small hole dry drilling in Ti-6Al-4V using Taguchi and grey relational analysis

被引：99
|
作者：
Prasanna, J. [1 ]
Karunamoorthy, L. [1 ]
Raman, M. Venkat [1 ]
Prashanth, Sai [1 ]
Chordia, D. Raj [1 ]
机构：
[1] Anna Univ, Coll Engn Guindy, Dept Mech Engn, Madras 600025, Tamil Nadu, India
来源：
MEASUREMENT | 2014年 / 48卷
关键词：
Small hole dry drilling; Ti-6Al-4V; Taguchi method; Grey relational analysis; Optimization; Geometrical accuracy; Thrust force; TITANIUM-ALLOY; ACCURACY ESTIMATION; STACKS; STEEL; SHEET;
D O I：
10.1016/j.measurement.2013.11.020
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The growing demand for miniaturization of systems necessitates the production of smaller components with high dimensional accuracy. In this experimental investigation, through holes were machined in a Ti-6Al-4V plate of 0.4 mm thickness using twisted carbide drill bits of 0.4 mm diameter by conventional dry drilling. The Taguchi's experimental design and Analysis of Variance (ANOVA) techniques have been implemented to understand the effects, contribution, significance and optimal machine settings of process parameters, namely, spindle speed, feed rate and air pressure. The performance characteristics of the small hole drilling were evaluated through thrust force, overcut, circularity and taper. Multi-performance optimization of the process parameters was realized by using grey relational analysis and mathematical modeling was done by regression analysis. The outcome of this research revealed that spindle speed and air pressure have the most significant impact on the dimensional accuracy of the hole; spindle speed and feed rate controls the thrust force. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：346 / 354
页数：9
相关论文
共 50 条
  • [1] OPTIMIZATION OF REAMING PROCESS PARAMETERS FOR TITANIUM TI-6AL-4V ALLOY USING GREY RELATIONAL ANALYSIS
    Ahmed, Shakeel L.
    Kumar, Pradeep M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [2] Optimization by Grey Relational Analysis of EDM Parameters on Machining Ti-6Al-4V
    Xie, Zhiping
    Zheng, Jiming
    Quan, Bianli
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 540 - +
  • [3] Optimization of process parameters for micro milling of Ti-6Al-4V alloy using Taguchi-based gray relational analysis
    Aslantas, K.
    Ekici, E.
    Cicek, A.
    MEASUREMENT, 2018, 128 : 419 - 427
  • [4] Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method
    Saravanan K
    Francis Xavier J
    Sudeshkumar M.P
    T. Maridurai
    Vijayananth Suyamburajan
    V. Jayaseelan
    Silicon, 2022, 14 : 997 - 1004
  • [5] Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method
    Saravanan, K.
    Xavier, Francis J.
    Sudeshkumar, M. P.
    Maridurai, T.
    Suyamburajan, Vijayananth
    Jayaseelan, V
    SILICON, 2022, 14 (03) : 997 - 1004
  • [6] Optimization of Machining parameters in EDM of Ti-6Al-4 V alloy using Taguchi Grey relational analysis Methodology
    Singh, Sandeep Kumar
    Prabhakar, Sunil
    Rao, Dinesh Kumar
    Khare, Sanchit Kumar
    MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 1231 - 1235
  • [7] Multi-Objective Optimization using Taguchi and Grey Relational Analysis on Machining of Ti-6Al-4V Alloy by Powder Mixed EDM Process
    Rouniyar, Arun Kumar
    Shandilya, Pragya
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 23779 - 23788
  • [8] Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V)
    Palanisamy, A.
    Rekha, R.
    Sivasankaran, S.
    SathiyaNarayanan, C.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 540 - +
  • [9] Optimization of Ti-6Al-4V Flank Milling Parameters using Taguchi Method
    Liu, C. Y.
    Yi, J. J.
    Zhou, W. H.
    Chu, C. L.
    ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 364 - 368
  • [10] Optimization of one direction tool path orientation for pocket milling of Ti-6Al-4V using taguchi based grey relational analysis
    Santhakumar, J.
    Iqbar, U. Mohammad
    Prakash, M.
    2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018), 2018, 402
12345