Application of Classic and T Lumped Parameter Thermal Models for Permanent Magnet Synchronous Machines

被引:0
|
作者
Guemo, Gilles Guedia [1 ]
Chantrenne, Patrice [2 ]
Jac, Julien [3 ]
机构
[1] CETHIL Univ Lyon, INSA LYON, Ctr Therm Lyon CETHIL UMR CNRS 5008, F-69621 Villeurbanne, France
[2] Univ Lyon, INSA Lyon, MATEIS UMR CNRS 5510, F-69621 Villeurbanne, France
[3] CTO ERNEO, F-34830 Villeurbanne, France
关键词
Electrical machine; heat transfer; lumped parameter; thermal modeling;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Heat Transfer simulation in Permanent Magnet Synchronous Machines is mandatory in order to predict temperatures during the design phase. The temperatures in the machine condition the choice of the correct materials as well as the cost of the machine. As these machines are complex, a compromise between accuracy and computational cost is necessary. In this paper, we present two thermal Permanent Magnet Synchronous Machine models developing using nodal approach. The first model corresponds to a classic nodal method, with a fine meshing of the machine. The second is made of a network of thermal resistors and capacitors set up using the T-nodal method with a crude meshing. This approach is quite popular as the computation time is quite short. Both models take into account the variation of copper heat losses with copper and magnet temperatures.
引用
收藏
页码:809 / 815
页数:7
相关论文
共 50 条
  • [1] Parameter Identification of a Lumped Parameter Thermal Model for a Permanent Magnet Synchronous Machine
    Guemo, Gilles Guedia
    Chantrenne, Patrice
    Jac, Julien
    [J]. 2013 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2013, : 1316 - 1320
  • [2] Online thermal parameter identification for permanent magnet synchronous machines
    Xiao, Shuai
    Griffo, Antonio
    [J]. IET ELECTRIC POWER APPLICATIONS, 2020, 14 (12) : 2340 - 2347
  • [3] Lumped-Parameter Thermal Model for Axial Flux Permanent Magnet Machines
    Rostami, Naghi
    Feyzi, Mohammad Reza
    Pyrhonen, Juha
    Parviainen, Asko
    Niemela, Markku
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2013, 49 (03) : 1178 - 1184
  • [4] Parameter measurements for permanent magnet synchronous machines
    Kondo, Minoru
    [J]. IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2007, 2 (02) : 109 - 117
  • [5] Application of Deep Learning in Parameter Estimation of Permanent Magnet Synchronous Machines
    Bui, Minh Xuan
    Dutta, Rukmi
    Rahman, Faz
    [J]. IEEE ACCESS, 2024, 12 : 40710 - 40721
  • [6] Torque Calculation in Interior Permanent Magnet Synchronous Machine Using Improved Lumped Parameter Models
    Mirahki, Hooshang
    Moallem, Mehdi
    [J]. PROGRESS IN ELECTROMAGNETICS RESEARCH M, 2014, 39 : 131 - 139
  • [7] Lumped parameter method of permanent magnet synchronous generator for wind energy
    Oner, Yasemin
    Senol, Ibrahim
    [J]. ELECTRICAL ENGINEERING, 2016, 98 (02) : 169 - 177
  • [8] Lumped parameter method of permanent magnet synchronous generator for wind energy
    Yasemin Oner
    İbrahim Şenol
    [J]. Electrical Engineering, 2016, 98 : 169 - 177
  • [9] Simple analytical models for permanent magnet synchronous machines
    Mosebach, H
    [J]. ELECTRICAL ENGINEERING, 1998, 81 (03): : 171 - 176
  • [10] Iron Loss and Parameter Measurement of Permanent Magnet Synchronous Machines
    Richter, Jan
    Dollinger, Andreas
    Doppelbauer, Martin
    [J]. 2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2014, : 1635 - 1641