Autohydrolysis, Pulping, and Bleaching of Eucalyptus urograndis in a Biorefinery Framework

Autohydrolysis and kraft pulping were sequentially applied to Eucalyptus urograndis wood to obtain added-value products from hydrolysis liquor. A biorefinery approach was used to bleach the resulting solid phase containing the cellulose pulp with an optimized O-D-(EP)-D bleaching sequence, where O denotes delignification with the sequence D bleaching with chlorine dioxide and EP alkaline extraction with soda and hydrogen peroxide. The pulp was then beaten to obtain paper sheets. The two-stage process yielded pulp with a small Kappa number relative to conventional delignification (4.9 to 13.7 vs 17.1). Using autohydrolysis temperatures of 160 degrees C to 170 degrees C during 0 min to 15 min made the process selective towards the extraction of hemicelluloses (xylan up to 43.9%). Additionally, the Kappa number and brightness obtained after bleaching with an O-D-EP-D sequence were suitable for preparing dissolving grade pulp. The brightness of the pulp obtained was identical with that of the reference pulp (91.0%) and the Kappa number was smaller (0.2 to 0.6). Beating the pulp for 4500 PFI revolutions produced paper sheets with slightly better tensile strength and tear index than those for sheets from the reference pulp (viz., 90.3 N.m.g(-1) and 9.9 mN.m(2).g(-1), respectively, versus 89.8 N.m.g(-1) and 9.7 mN.m (2).g(-1), respectively).