Fabrication and characterization of metal core piezoelectric fibres by dip coating process

被引：3
|
作者：
Dolay, A. [1 ,2 ,3 ]
Courtois, C. [1 ,2 ]
d' Astorg, S. [1 ,2 ]
Rguiti, M. [1 ,2 ]
Petitniot, J. -L. [3 ]
Leriche, A. [1 ,2 ]
机构：
[1] UVHC, LMCPA EA 2443, F-59313 Valenciennes, France
[2] Univ Lille Nord France, F-59000 Lille, France
[3] ONERA Lille, F-59045 Lille, France
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2014年 / 34卷 / 12期
关键词：
Dip-coating; PZT; Fibres; Piezoceramics; Actuators;
D O I：
10.1016/j.jeurceramsoc.2014.04.035
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Metal core piezoelectric fibres (MCPFs) show strong potential for structural actuator applications. Unfortunately the development of such fibres is problematic because of their fabrication difficulties. In order to obtain the best properties, both aspect ratio and piezoceramic metal core compatibility have to be considered. For those reasons, fabrication of such fibres by a multi-dip-coating process has been investigated on platinum wires. The multi-coating process is shown to be more versatile and allows to control the aspect ratio. It is shown that decreasing slurry temperature during the dip process is a suitable way to reduce the number of coating steps in order to achieve high aspect ratio. After sintering, coatings exhibit the same behaviour as bulk ceramics in terms of microstructure, crystallography and ferroelectric loops. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2951 / 2957
页数：7
相关论文
共 50 条
  • [1] Fabrication of piezoelectric fibers with metal core
    Qiu, JH
    Tani, J
    Yamada, N
    Takahashi, H
    [J]. SMART STRUCTURES AND MATERIALS 2003: ACTIVE MATERIALS: BEHAVIOR AND MECHANICS, 2003, 5053 : 475 - 483
  • [2] Dip coating fabrication process for micro-tubular SOFCs
    Torabi, Alireza
    Etsell, Thomas H.
    Sarkar, Partha
    [J]. SOLID STATE IONICS, 2011, 192 (01) : 372 - 375
  • [3] Modelling the lateral resonance mode of piezoelectric fibres with metal core
    Sebald, G
    Qiu, JH
    Guyomar, D
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2005, 38 (19) : 3733 - 3740
  • [4] Fabrication and characterization of inert-substrate-supported tubular single cells by dip-coating process
    Zhao, Kai
    Kim, Bok-Hee
    Xu, Qing
    Ahn, Byung-Guk
    [J]. JOURNAL OF POWER SOURCES, 2014, 245 : 671 - 677
  • [5] Modeling and characterization of piezoelectric fibers with metal core
    Sebald, G
    Qiu, JH
    Guyomar, D
    Hoshi, D
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2005, 44 (08): : 6156 - 6163
  • [6] Piezoelectric characterization of Pb(Zr,Ti)O3 thin films deposited on metal foil substrates by dip coating
    Hida, Hirotaka
    Hamamura, Tomohiro
    Nishi, Takahito
    Tan, Goon
    Umegaki, Toshihito
    Kanno, Isaku
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2017, 56 (10)
  • [7] Fabrication of Sol-Gel Optical Waveguide by Hot-Dip Coating Process
    A. Moujoud
    M. P. Andrews
    S. I. Najafi
    [J]. Journal of Sol-Gel Science and Technology, 2005, 35 : 123 - 126
  • [8] Influence of process parameters on fabrication of PZT(53/47) thick films by a dip-coating process
    He, XY
    Zhang, Y
    Qiu, PS
    Ding, AL
    [J]. FIFTH INTERNATIONAL CONFERENCE ON THIN FILM PHYSICS AND APPLICATIONS, 2004, 5774 : 316 - 319
  • [9] Fabrication of sol-gel optical waveguide by hot-dip coating process
    Moujoud, A
    Andrews, MP
    Najafi, SI
    [J]. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2005, 35 (02) : 123 - 126
  • [10] Fabrication and investigation of superhydrophobic surface by dip coating
    Meikandan, M.
    Kumar, P. Ganesh
    Sundarraj, M.
    Karthick, M.
    Malarmohan, K.
    [J]. INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 2020, 27 (01) : 60 - 66
12345