The application of an ANFIS and grey system method in turning tool-failure detection

The cutting process is a major material removal process; hence, it is important to search for ways of detecting tool failure. This paper describes the results of the application of an adaptive-network-based fuzzy inference system (ANFIS) for tool-failure detection in a single-point turning operation. In a turning operation, wear and failure of the tool are usually monitored by measuring cutting force, load current, vibration, acoustic emission (AE) and temperature. The AE signal and cutting force signal provide useful information concerning the tool-failure condition. Therefore, five input parameters of the combined signals (AE signal and cutting force signal) have been used in the ANFIS model to detect,he tool state. In this model, we adopted three different types of membership function for analysis for ANFIS training and compared their differences regarding the accuracy rate of the tool-state detection. The result obtained for the successful classification of tool state with respect to only two classes (normal or failure) is very good. The results also indicate that a triangular MF and a generalised bell MF have a better rate of detection. We also applied grey relational analysis to determine the order of influence of the five cutting parameters on tool-state detection.