Influence of contact parameters in fretting-fatigue contact 3D problems

被引：1
|
作者：
Hamadouche, Fella [1 ]
Benzaama, Habib [1 ]
Mokhtari, Mohamed [1 ]
Tahar, Miloud Abbes [2 ]
机构：
[1] Natl Polytech Sch Oran ENPO, Lab Biomech & Biomat, Es Senia, Algeria
[2] Univ Hassiba Benbouali, Lab Mech & Energy, Chlef, Algeria
来源：
FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY | 2021年 / 15卷 / 55期
关键词：
Fretting fatigue; Finite Element Method; 3; dimensions; crack and the stress intensity factors; EDGE;
D O I：
10.3221/IGF-ESIS.55.17
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A numerical study on the influence of contact parameters on fretting fatigue behavior is carried out by using a new method SFEM (Stretching Finite Element Method) is presented in this article. Several parameters are made to vary: geometric shapes of the mesh, materials and contact parameters. The three-dimensional parametric model is composed by specimen and a pad in full contact. A Fortran Code is used to generate the parametric mesh. The stress intensity factors are calculated by varying the above contact parameters and the stress intensity factor under modes 1, 2 and 3 are computed.
引用
收藏
页码：228 / 240
页数：13
相关论文
共 50 条
  • [1] Analysis of contact stresses in the problems of wear and fretting-fatigue
    Drozdov, Yu.N.
    Sil'verstov, I.N.
    Ushakov, B.N.
    Problemy Mashinostraeniya i Nadezhnos'ti Mashin, 2002, (02): : 50 - 54
  • [2] 3D contact effects in fretting fatigue tests
    Vazquez, J.
    Erena, D.
    Navarro, C.
    Dominguez, J.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 118
  • [3] Orientation of propagating crack paths emanating from fretting-fatigue contact problems
    Giner, Eugenio
    Diaz-Alvarez, Jose
    Marco, Miguel
    Henar Miguelez, Ma
    FRATTURA ED INTEGRITA STRUTTURALE, 2016, Gruppo Italiano Frattura (35): : 285 - 294
  • [4] Direction of crack propagation in a complete contact fretting-fatigue problem
    Giner, Eugenio
    Sabsabi, Mohamad
    Jose Rodenas, Juan
    Javier Fuenmayor, F.
    INTERNATIONAL JOURNAL OF FATIGUE, 2014, 58 : 172 - 180
  • [5] Fretting-fatigue and fatigue contact Experimentation, modeling and affirmative strategies-a State of the art
    Nelias, D.
    MATERIAUX & TECHNIQUES, 2012, 100 (03): : 177 - 179
  • [6] Influence of contact configuration in fretting fatigue testing
    Pape, JA
    Neu, RW
    WEAR, 1999, 225 : 1205 - 1214
  • [7] INFLUENCE OF CONTACT LOADING ON FRETTING FATIGUE BEHAVIOR
    FAANES, S
    FERNANDO, US
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1994, 17 (08) : 939 - 947
  • [8] METHOD OF INVESTIGATION OF FRETTING-FATIGUE PROCESS IN CONTACT ZONES BETWEEN SHAFT AND EMBRACING PART
    BULAVIN, VV
    ILIN, AV
    NEMANOV, MS
    FILIMONOV, GN
    INDUSTRIAL LABORATORY, 1978, 44 (03): : 419 - 422
  • [9] Fretting fatigue in a spherical contact
    Navarro, C
    García, M
    Domínguez, J
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2002, 37 (06): : 469 - 478
  • [10] Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model
    Bentahar, Mohammed
    Benzaama, Habib
    Noureddin, Mahmoudi
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2021, 15 (57): : 182 - 194
12345