The effect of texture on shape memory in Cu-Al-Ni melt-spun ribbons

被引：0
|
作者：
Morawiec, H [1 ]
Lelatko, J [1 ]
Cesari, E [1 ]
机构：
[1] Silesian Univ, Inst Phys & Chem Met, PL-40007 Katowice, Poland
来源：
JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS | 1999年
关键词：
melt-spun ribbon; texture; martensitic transformation; shape recovery;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Melt-spun ribbons of copper-based alloys show a texture which becomes sharper with the wheel speed increase. The texture consists of a fibre [100] orientation and two sheet component orientations (100)[001] and (100)[011] - related to the DO3 -parent phase. The fatter component increases after annealing the ribbons at 900 degrees C. The reversible elongation during martensitic transformation under stress increases with texture development.
引用
收藏
页码：1096 / 1099
页数：4
相关论文
共 50 条
  • [1] EFFECT OF WHEEL VELOCITY ON TEXTURE FORMATION AND SHAPE MEMORY IN Cu-Al-Ni BASED MELT-SPUN RIBBONS
    Goryczka, T.
    ARCHIVES OF METALLURGY AND MATERIALS, 2009, 54 (03) : 755 - 763
  • [2] Texture and TWSM effect induced in Cu-Al-Ni melt-spun ribbons
    Goryczka, T
    Morawiec, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 378 (1-2): : 248 - 252
  • [3] Characterisation of Cu-Al-Ni based melt spun shape memory ribbons
    Seguí, C
    Goryczka, T
    Pons, J
    Cesari, E
    Morawiec, H
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1072 - 1075
  • [4] Structure and properties of melt-spun Cu-Al-Ni shape memory alloys
    Morawiec, H
    Lelatko, J
    Stróz, D
    Gigla, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 273 : 708 - 712
  • [5] Thermomechanical cycling in Cu-Al-Ni-based melt-spun shape-memory ribbons
    Font, J
    Cesari, E
    Muntasell, J
    Pons, J
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 354 (1-2): : 207 - 211
  • [6] IMPROVEMENT OF DUCTILITY OF MELT SPUN CU-AL-NI SHAPE MEMORY ALLOY RIBBONS BY ADDITION OF TI OR ZR
    MATSUOKA, S
    HASEBE, M
    OSHIMA, R
    FUJITA, FE
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1983, 22 (08): : L528 - L530
  • [7] Parent phase ageing and martensite stabilization in Cu-Al-Ni based melt spun shape memory ribbons
    Seguí, C
    Pons, J
    Cesari, E
    Muntasell, J
    Font, J
    ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 799 - 804
  • [8] Microstructures of Ti-48%Ni shape memory melt-spun ribbons
    Xing Hong-yan
    Kim, H. Y.
    Miyazaki, S.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S92 - S95
  • [9] Microstructures of Ti-48%Ni shape memory melt-spun ribbons
    邢鸿雁
    H.Y.KIM
    S.MIYAZAKI
    TransactionsofNonferrousMetalsSocietyofChina, 2006, (S1) : 92 - 95
  • [10] Shape memory properties of Ni-Ti based melt-spun ribbons
    R. Santamarta
    E. Cesari
    J. Pons
    T. Goryczka
    Metallurgical and Materials Transactions A, 2004, 35 : 761 - 770
12345