SMC composites waste management as reinforcing fillers in polypropylene by combination of mechanical and chemical recycling processes

A new process of management of waste of composite materials from Sheet Moulding Compounds (SMC), as reinforcing fillers for thermoplastic materials, including both mechanical and chemical processes is proposed in this paper. Communited SMC being composed of coated glass fibres intimately mixed with calcium carbonate powder, their reinforcing power is low. First, the fibrous part was increased by partial dissolution of calcium carbonate present in the crushed products SMC. Second, a process of partial solvolysis was developed aiming at strong increasing the interfacial mechanical properties by functionalising of SMC load incorporated into polypropylene/grafted maleic anhydride polypropylene (PP/PPgma). At this effect, we investigated a treatment with a hot triamine (diethylenetriamine, DETA) in order to create a functionalisation, after scission of the bond ester of unsaturated polyester, as bridging amino-succinimide.The effect of this recycling way by partial solvolysis was checked from the mechanical properties of the resulting reinforced PP/PPgma material: Although a lower of Young modulus, better yield stress and especially resilience were observed. (c) 2006 Springer Science+ Business Media, Inc.