Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS

被引：103
|
作者：
Dumont, M.
Steuwer, A.
Deschamps, A.
Peel, M.
Withers, P. J.
机构：
[1] Univ Manchester, Manchester Mat Sci Ctr, Manchester M1 7HS, Lancs, England
[2] Univ Aix Marseille 3, Fac St Jerome, UMR 6122, TECSEN, F-13397 Marseille 20, France
[3] CNRS, LTPCM, UMR 5614, ENSEEG, F-38402 St Martin Dheres, France
来源：
ACTA MATERIALIA | 2006年 / 54卷 / 18期
基金：
英国工程与自然科学研究理事会;
关键词：
small-angle X-ray scattering; synchrotron X-rays; microstructure; precipitation; 7xxx alloys;
D O I：
10.1016/j.actamat.2006.06.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper describes the microstructural response of an age-hardenable, high-strength 7449 aluminium alloy to friction stir welding. Plates in the naturally aged (T3) and over-aged (T79) conditions were welded using two weld tool translation speeds. Maps of precipitate volume fraction and size were obtained by spatially resolved small-angle X-ray scattering over a cross-section of the welded plate, complemented by direct observations made by transmission electron microscopy. The spatial variations of precipitate volume fraction and size were assessed quantitatively for the characteristic zones of the welds, and supported by complementary hardness measurements. The effect of initial microstructure and welding speed,in particular in the heat-affected and thermomechanically affected zones, is discussed. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：4793 / 4801
页数：9
相关论文
共 50 条
  • [1] Microstructure and microhardness of aluminium alloy friction stir welds with heat treatment
    Huang, Y. X.
    Wan, L.
    Lv, Z. L.
    Lv, S. X.
    Zhou, L.
    Feng, J. C.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2016, 21 (08) : 638 - 644
  • [2] Forming of aluminium alloy friction stir welds
    Bruni, Carlo
    PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [3] Residual stresses in aluminium alloy friction stir welds
    Deplus, Kevin
    Simar, Aude
    Van Haver, Wim
    de Meester, Bruno
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 56 (5-8): : 493 - 504
  • [4] Residual stresses in aluminium alloy friction stir welds
    Kevin Deplus
    Aude Simar
    Wim Van Haver
    Bruno de Meester
    The International Journal of Advanced Manufacturing Technology, 2011, 56 : 493 - 504
  • [5] Thermal and microstructure modelling in thick plate aluminium alloy 7075 friction stir welds
    Hyoe, T
    Colegrove, PA
    Shercliff, HR
    FRICTION STIR WELDING AND PROCESSING II, 2003, : 33 - 42
  • [6] Microstructure and mechanical property correlations in AA 6061 aluminium alloy friction stir welds
    Reddy, G. Madhusudhan
    Mastanaiah, P.
    Prasad, K. Sata
    Mohandas, T.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2009, 62 (01) : 49 - 58
  • [7] Microstructure and mechanical property correlations in AA 6061 aluminium alloy friction stir welds
    Reddy G.M.
    Mastanaiah P.
    Prasad K.S.
    Mohandas T.
    Transactions of the Indian Institute of Metals, 2009, 62 (1) : 49 - 58
  • [8] CFD modelling of friction stir welding of thick plate 7449 aluminium alloy
    Colegrove, P. A.
    Shercliff, H. R.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (04) : 429 - 441
  • [9] Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds
    Attallah, M. M.
    Davis, C. L.
    Strangwood, M.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (04) : 361 - 369
  • [10] Microstructure of friction stir welding of aluminium alloy to magnesium alloy
    Kostka, A.
    Coelho, R. S.
    dos Santos, J.
    Pyzalla, A. R.
    SCRIPTA MATERIALIA, 2009, 60 (11) : 953 - 956
12345