Preparation structure synthesis of 5-DOF symmetrical parallel manipulator

被引：0
|
作者：
Fang Hairong [1 ]
Fang Yuefa [1 ]
Han Bin [1 ]
机构：
[1] Beijing Jiaotong Univ, Sch Mech & Elect Control Engn, Beijing 100044, Peoples R China
来源：
IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS | 2006年
关键词：
parallel mechanisms; 5-DOF; symmetrical mechanisms; structure synthesis;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Based on screw theory, the relationship between motion screw system of limbs and constraint screw system of moving platform is analyzed, and the explicit expressions between constraint force screw of moving platform and motion screw of limbs are established. A method of structure synthesis for 5-DOF parallel manipulator is advanced. The conditions of kinematics pairs for limbs with one ZPW of constraint are derived. All possible of limbs of force constraints are obtained according to the formula. Finally, a 3R2T 5-DOF parallel manipulator is used as an example to describe the synthesis procedure for symmetrical and non-symmetrical 5-DOF parallel manipulators. The result of motion simulation analysis of the new manipulators proves the legitimacy of the method.
引用
收藏
页码：2336 / +
页数：3
相关论文
共 50 条
  • [1] Parameter sensitivity analysis of a 5-DoF parallel manipulator
    Lian, Binbin
    Sun, Tao
    Song, Yimin
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2017, 46 : 1 - 14
  • [2] Statics Analysis of a Novel 5-DOF Parallel Manipulator
    Li, Yanbiao
    Ji, Shiming
    Wang, Zhongfei
    Zhang, Li
    Wang, Yangyu
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 311 - 315
  • [3] Structure synthesis of 3r2t 5-DOF symmetrical parallel robot mechanisms
    Fang, HaiRong
    Fang, Yuefa
    Hu, ZhunQing
    Wang, Shuo
    DCABES 2006 PROCEEDINGS, VOLS 1 AND 2, 2006, : 998 - 1001
  • [4] Force analysis of a novel 5-DOF fully parallel manipulator
    Peng, Binbin
    Gao, Feng
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2007, VOLS 1 AND 2, 2007, : 683 - 688
  • [5] Dimensional Synthesis of a 5-DOF Parallel kinematic Manipulator for a 3d printer
    Fiore, Enrico
    Giberti, Hermes
    Sbaglia, Luca
    2015 16TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS (REM), 2015, : 41 - 48
  • [6] Singularity analysis for a 5-DoF fully-symmetrical parallel manipulator 5-(RRR) under bar(RR)
    Zhu, Si-Jun
    Huang, Zhen
    Zhao, Ming-Yang
    PROCEEDINGS OF THE 2007 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-10, 2007, : 1189 - +
  • [7] Type synthesis of 5-DOF parallel manipulators
    Li, QC
    Huang, Z
    2003 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2003, : 1203 - 1208
  • [8] A Kinematics Analysis for a 5-DOF Manipulator
    Lu, Jinyan
    Xu, De
    Wang, Peng
    26TH CHINESE CONTROL AND DECISION CONFERENCE (2014 CCDC), 2014, : 1495 - 1499
  • [9] Path Planning of 5-DOF Manipulator
    Kim, Hyun Woo
    Chen, Hu
    Lee, Jang Myung
    2014 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2014, : 877 - 881
  • [10] IMPLEMENTATION OF AN ANALYTICAL INVERSE KINEMATICS SIMULATION METHOD FOR A 5-DOF PARALLEL MANIPULATOR
    Hendriko, Hendriko
    Khamdi, Nur
    Jaenudin, Jajang
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2019, 14 (04): : 1948 - 1959
12345